How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask ddamato1986 Your Own Question
ddamato1986, ASE Certified Technician
Category: Car
Satisfied Customers: 208
Experience:  Engine Repair, Performance, A/C, Suspension and Brakes
Type Your Car Question Here...
ddamato1986 is online now
A new question is answered every 9 seconds

,I have a ml270 cdi w163 02 plate.The fuse..beam..blows..bulb

Resolved Question:

Can you help,I have a ml270 cdi w163
02 plate.
The fuse for the nearside main beam headlight
blows every time i use them. I have tried putting a higher ampage fuse in but it still blows. I have changed the bulb and checked the wiring connection, but can see no obvious fault.
Submitted: 5 years ago.
Category: Car
Expert:  ddamato1986 replied 5 years ago.

ddamato1986 :

Hello I might beable to help you. Check the ground side of the circuit and be sure there isn't a break or short in the wire. You can also use a volt meter to check continuity to ground. I the grounding end of the circuit is not grounded it will short. That would be my recommendation as your first steps.

ddamato1986 and 4 other Car Specialists are ready to help you

Related Car Questions