How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Randall C Your Own Question
Randall C
Randall C, ASE Certified Technician
Category: Car
Satisfied Customers: 12890
Experience:  32 years Foreign / Domestic Cars All aspects of Diag and Repair
Type Your Car Question Here...
Randall C is online now
A new question is answered every 9 seconds

I need to disable the rear airbags when changing tires..Land Rover

Customer Question

Do I need to disable the rear airbags when changing tires on my 2006 Land Rover LR3 and of so, how?
Submitted: 5 years ago.
Category: Car
Expert:  Randall C replied 5 years ago.
Hello, I am Randall. I have reviewed your question and working on it now.

do you have the selector to selct "off road" suspension?
Customer: replied 5 years ago.
I can select off road
Expert:  Randall C replied 5 years ago.
Thanks. If you are doing one wheel at a time? then no need to perform this but.. if you want to lift an axle OR lift entire vehicle at one time, then you selsct the "off road" lift, do the work, place back on ground, retivate out of "off road" here a little info for the vehicle lifting

Raising and Supporting the Vehicle
  1. Position vehicle on ramp.
  2. Position suspension in 'off-road' height.
  3. Apply parking brake.
  4. Raise ramp to desired height.


  1. Align the wheel free longitudinals beneath the body frame longitudinals and position the support blocks beneath the longitudinals in the positions shown.

CAUTION: Ensure that the front and rear support blocks are correctly oriented to front and rear of vehicle.

  1. Engage wheel free and lower ramp slowly until weight of vehicle rests on support blocks and road wheels are just clear of ramp.
  2. Ensure that the vehicle is correctly supported on all four support blocks, that blocks are still correctly positioned and are in full contact with the body frame longitudinals.
  3. Lower the ramp.
NOTE: Return the suspension to 'normal ride height' when the vehicle is removed from the ramp.
Customer: replied 5 years ago.
Good thanks. Does it show exactly what the "off road" setting looks like?
Expert:  Randall C replied 5 years ago.
an LED on the consol lights to "off road"
Customer: replied 5 years ago.
There are only graphics on a Range Rover.
Expert:  Randall C replied 5 years ago.
I remember this but cant remember 100% the grafics not being there and info on my end to send is limited. can you describe what you are seeing on your consol?
Randall C and 9 other Car Specialists are ready to help you
Customer: replied 5 years ago.
No problem. Thanks
Expert:  Randall C replied 5 years ago.
You should see the icon is position#7 shown but pic is bad. sorry