How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Eric Your Own Question
Eric
Eric, Automotive Repair Shop Manager
Category: Car
Satisfied Customers: 31935
Experience:  Automotive Repair Shop Manager, Technician/JA Mentor
3195632
Type Your Car Question Here...
Eric is online now
A new question is answered every 9 seconds

2001 Isuzu: a stop light with brake pedal..engage..disconnect

This answer was rated:

Have a 2001 Isuzu NPR with an abs problem. When sitting at a stop light with brake pedal on the abs pump will engage and push the pedal up releasing the brakes. When you disconnect the abs pump at the pump the brake work normal. Has code po267 but have no information.
Hi,

Ok, the P0267 is an engine fault code, Injector Circuit Low - Cylinder 3, and not related to the ABS problem.

The ABS problem is an unwarranted activation of the ABS system, which in the overwhelming majority of times will not set any ABS fault code. This unwarranted activation is due to a faulty ABS control module and will require replacing it in order to correct the problem




Ok, the P0267 is an engine fault code, Injector Circuit Low - Cylinder 3, and not related to the ABS problem.

The ABS problem is an unwarranted activation of the ABS system, which in the overwhelming majority of times will not set any ABS fault code. This unwarranted activation is due to a faulty ABS control module and will require replacing it in order to correct the problem
Customer: replied 5 years ago.
Sorry gave wrong code information code is co265
Hi,

Ok, this is for EBCM(electronic brake control module) relay fault. This is not for the relay you replaced, but rather for failure of the internal relays built into the EBCM. the only repair for this is to replace the EBCM as the internal relays are integrated into the EBCM
Eric and 3 other Car Specialists are ready to help you