How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Lurch Your Own Question
Lurch, Aftermarket & Factory Electronics
Category: Car
Satisfied Customers: 20895
Experience:  Ford, Chev Cert, Heavy Line Mech, Mobile Electronics.Sales, Installation & Repair for 30 years.
Type Your Car Question Here...
Lurch is online now
A new question is answered every 9 seconds

94 rodeo: cam shaft pullet..15/16 inch bolt holding it on

Customer Question

94 rodeo isuzu tring to get the cam shaft pullet off and having no luck, just would l9ike ot confirm is it left or right to loosen the 15/16 inch bolt holding it on. I believe it is left to loosen but not sure at this point. I have used pb blaster to try and help loosen it . no luck
Submitted: 6 years ago.
Category: Car
Expert:  Lurch replied 6 years ago.


If you can hold the Cam tight, wack the end of a Wrench or Breaker Bar with a Hammer to make a quick hard release







Please keep in mind Just Answer is set up on an honor system.

I have sent the information you have requested.

PLEASE click ACCEPT so that I may get credit, thanks.


















Expert:  Lurch replied 6 years ago.


I use a Strap on the Cam Pulley to hold it.

15/16 is not uncommon size & most Auto Parts Stores will have