How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mastertech1 Your Own Question
Mastertech1, ASE Master Technician
Category: Car
Satisfied Customers: 2261
Experience:  30 years of all phases automotive diagnostics and repair
Type Your Car Question Here...
Mastertech1 is online now
A new question is answered every 9 seconds

Universal: Mr Gasket Oil Filler Cap - Chrome plated, Steel..Part No.

Resolved Question:

I measured the the mouth of the oil filler opening.Its approx 2 inches in diameter. will the Universal - Mr Gasket Oil Filler Cap - Chrome plated, Steel, Universal product Part No.: G129815 be suitable part?
Submitted: 6 years ago.
Category: Car
Expert:  Mastertech1 replied 6 years ago.
Give me about 5mins to check, I will be right back.
Customer: replied 6 years ago.
Expert:  Mastertech1 replied 6 years ago.
As far as I see Yes it will work, But if I can offer you a suggestion, Go to your local parts house and get oil filler cap for a (1996 Chevy s-10 blazer with 2.8 V-6 engine) It is a push in rubber type cap,(will be a little snug at first, but will work great) Thanks
Mastertech1 and other Car Specialists are ready to help you
Customer: replied 6 years ago.
I hope this works. I took a tape measurer and just measured the width of the hole. So is the diamete r of the opening 2 inches or 1 inch and some change? help. I tried the oil cap from a 1999 galant and that was slightly to big. I thought another 4 cyclinder car with about the same size engine would work. the has a 1.6L engine?
Expert:  Mastertech1 replied 6 years ago.
The cap for the blazer will work just fine,Thanks