How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask david Your Own Question
david, Auto Service Technician
Category: Car
Satisfied Customers: 1500
Experience:  Certified Master Technician,Certified in diesel & gasoline engines
Type Your Car Question Here...
david is online now
A new question is answered every 9 seconds

Auto tran 97 plym van codes p1784,p0732,p1782,p0134,p0700 what r..rev

Customer Question

auto tran 97 plym van codes p1784,p0732,p1782,p0134,p0700 what r these (in english) how do i fix thanks put in drive go half ablock or less goes out of gear rev the engine kicks back in gear does this off and on. eventually it will work out the more i drive it.but if i let it set for a couple of hours it will start all over
Submitted: 6 years ago.
Category: Car
Expert:  david replied 6 years ago.

david :

Hi thank you for youe question hope this helps.

david :

P0134 = O2 Sensor Circuit No Activity Detected - Bank 1 Sensor 1

P0700 = Transmission Control System (MIL Request)
This is telling you there are codes in the transmission control computer. (P1784, P1782, P0732)

P0732 = Gear 2 Incorrect Ratio
P1784 = Transmission Mechanical Failure - First And Reverse
P1782 = Chrysler 24 Pressure Switch Check

david :

Now the P0134 code is telling you the Bank 1 Sensor 1 02 sensor is not sending a signal to the computer.

But this is something we fix after looking at the transmission.

david :

Does the transmission work at all?


Have you pull the transmission pan to see if there is metal in it?


Does the fluid smell or look burnt?

david :

Most likely you need a transmission overhaul, but one code you had (P1782) is for a solenoid pack that could cause this problem.

david :

Let me know.