How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Lurch Your Own Question
Lurch, Aftermarket & Factory Electronics
Category: Car
Satisfied Customers: 21018
Experience:  Ford, Chev Cert, Heavy Line Mech, Mobile Electronics.Sales, Installation & Repair for 30 years.
Type Your Car Question Here...
Lurch is online now
A new question is answered every 9 seconds

The windshield fluid reservoir?There doesnt seem to be an easy way

This answer was rated:

how can I replace or repair the windshield fluid reservoir?
There doesn't seem to be an easy way to remove it. Do I need to remove the rh front body panel?
Appreciate any answers.

[email protected]



Here is SAAB procedures


To Remove

1 Unhook the wire clip to release the right-hand direction indicator lens.
2 Remove the two bolts and remove the upper bracket.
3 Unplug the connector.
4 Jack up the car and remove the right-hand front wheel.
5 Remove the lower pant of the spoiler and the front section of the wing liner on the right-hand side.
6 Remove the two reservoir retaining nuts (adjacent to the receiver on cars with A/C).
7 Disconnect the hose and unplug the connector on the top of the evaporative emission canister and lift out the reservoir complete with wiring.

To Install
Install in reverse order.






If this helped, please click ACCEPT..........

Lurch and 12 other Car Specialists are ready to help you