How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Brian Your Own Question
Brian, Technician
Category: Car
Satisfied Customers: 1851
Experience:  20yrs volvo/saab foreign car service
Type Your Car Question Here...
Brian is online now
A new question is answered every 9 seconds

which black rubber pipe (push fit ) goes to the brass nipple

Customer Question

which black rubber pipe (push fit ) goes to the brass nipple , bottom left of the turbo, as viewed from top looking down. Like a dick i forgot to mark them!!!. Its the only brass nipple, round the bottom back of the turbo. 2001,93 sabb. boost sensor pipe, how do i trace it back correctly??? to make sure. Thanks Ian.
Submitted: 7 years ago.
Category: Car
Expert:  Brian replied 7 years ago.

Hi and welcome. The lines are all different lengths the one you are talking about is the longest one the one short than that goes to waste gate actuator and the other with angle fitting goes to the down pipe to to the turbo . if you need further help let me know.