How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mike Kelly Your Own Question
Mike Kelly
Mike Kelly, Auto Mechanic
Category: Car
Satisfied Customers: 5470
Experience:  17 years experience as a auto mechanic,foreign and domestic.5 years running my own repair business.
19374685
Type Your Car Question Here...
Mike Kelly is online now
A new question is answered every 9 seconds

2006 porsche 911: I change the passenger side directional bulb

Customer Question

how do I change the passenger side directional bulb on my 2006 porsche 911 cab4s
Submitted: 7 years ago.
Category: Car
Expert:  Mike Kelly replied 7 years ago.

Hi,how are you?

 

 

945619 Removing And Installing Bulb For Front Direction Indicator

Removing bulb for front direction indicator light

 

 

 

graphic

 

 

graphic

 

 

 

graphic

 

 

 

 

 

  • Open the bulb holder with the bayonet lock for the front direction indicator light bulb and remove it.
  •  

     

     

    graphic

     

     

     

     

     

    1. Press the bulb into the bulb holder, turn it clockwise and remove it from the bulb holder.

    Installing bulb for front direction indicator

    Installing bulb for front direction indicator light

     

     

     

    graphic

     

     

     

     

     

  • Press the bulb into the bulb holder and turn it anti-clockwise until it engages fully.
  •  

     

     

     

    graphic

     

     

     

     

     

    Insert the bulb with the bulb holder into the headlight and lock into place with the bayonet lock

    Customer: replied 7 years ago.
    When I pull back rug, I do not see any of the headlight assembly other than a wire with some rubber bushings. How do I get at the light assembly.
    Expert:  Mike Kelly replied 7 years ago.
    Hi,there should be a plastic cover over the light assembly.