How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Trouble shooter 1 Your Own Question
Trouble shooter 1
Trouble shooter 1, ASE Certified Technician
Category: Car
Satisfied Customers: 371
Experience:  associates degree 9 years warranty
Type Your Car Question Here...
Trouble shooter 1 is online now
A new question is answered every 9 seconds

2007 hyundai elantra: 2.0L..valve body..plastic pistons are the same

Customer Question

2007 hyundai elentra 2.0L Removed the valve body in transmission and cannot find the correct locations of the accum. springs, the plastic pistons are the same but the springs are different.. Just do not have any info on which hole takes which spring..
Submitted: 7 years ago.
Category: Car
Expert:  Trouble shooter 1 replied 7 years ago.

Edited by Trouble shooter 1 on 10/1/2009 at 4:22 PM EST
Expert:  Trouble shooter 1 replied 7 years ago.
I hope this information will assist you
Customer: replied 7 years ago.
the accumulator pistons are above the valve body There are 4 of them all 4 have large springs and 2 have small springs in addition to the large springs.. They are located in the body of trans it self 3 toward the back and 1 to ward the front.. when we remove the valve body they came out and fell into the drain pan and we cannot find which hole which one goes in
Expert:  Trouble shooter 1 replied 7 years ago.





this is all I can find on this trans


Case & Related Parts
Valve Body
Gear Train