How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask 1969LSCamaro Your Own Question
1969LSCamaro, ASE Certified Technician
Category: Car
Satisfied Customers: 394
Experience:  ASE Certified Master Tech with Advanced Level (L1) - 20 Years Exp. with multiple makes of vehicle
Type Your Car Question Here...
1969LSCamaro is online now
A new question is answered every 9 seconds

91 wrangler: interior wiring harness..wipers, lights, signals

This answer was rated:

I have a wiring question. I replaced the interior wiring harness on a 91 wrangler. everything works wipers, lights, signals, but it will not start. not even turn over. I replaced the fuses but still nothing. And yes i've rechecked all the plugs


Check for power coming out of the ignition switch when turning the key to crank - if there is juice, make sure you have the clutch pedal safety switch hooked up if it is a manual. Thanks.

1969LSCamaro and 3 other Car Specialists are ready to help you