How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Lurch Your Own Question
Lurch, Aftermarket & Factory Electronics
Category: Car
Satisfied Customers: 20958
Experience:  Ford, Chev Cert, Heavy Line Mech, Mobile Electronics.Sales, Installation & Repair for 30 years.
Type Your Car Question Here...
Lurch is online now
A new question is answered every 9 seconds

98 continental V8 4.6 repair/replace pully for serpentine belt.

Customer Question

98 continental V8 4.6 repair/replace pully for serpentine belt. Small pully near crankshaft pully. NOT the small one on the right cylinder head. My Chilton manual does not cover this. I cannot hardly even see this pully. The engine is so close to the inner fender and other things it is VERY tight to get into the area. How do I access it and replace it? Were can I get diagrams and instructions?
Submitted: 8 years ago.
Category: Car
Expert:  Lurch replied 8 years ago.

Is it the one in this diagram?



Customer: replied 8 years ago.
Yes, that is the pulley that failed. So, How do I replace it?
Expert:  Lurch replied 8 years ago.

That is the Tensioner Pulley.....


Here is Lincoln procedure:



Lurch and 6 other Car Specialists are ready to help you
Customer: replied 8 years ago.
Thank you for the help. gary
Expert:  Lurch replied 8 years ago.

You are welcome.....

Thank You

Thanks for using J/A