How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jerry Your Own Question
Jerry
Jerry, Master Mechanic
Category: Car
Satisfied Customers: 17220
Experience:  ASE master, 30+ years. All makes and models. Trouble shooter, shop forman, service manager
2947720
Type Your Car Question Here...
Jerry is online now
A new question is answered every 9 seconds

how to replace broken alternator belt on 1997 isuzu rodeo (3.2

Resolved Question:

how to replace broken alternator belt on 1997 isuzu rodeo (3.2 ,4wd ,ps ,ac )
Submitted: 8 years ago.
Category: Car
Expert:  Jerry replied 8 years ago.
Hello and welcome to Just answer.com, Super mechanic here. About your vehicle.

You will need to take off the other belts to get the alternator belt on. Here are the steps for the belt adjustment, you just have to remove them when they are loose, and then reinstall them according to the instructions.




graphic





GENERATOR & FAN PULLEY
1 Drive belt Loosen generator fixing bolt and adjuster lock bolt.
  1. Adjust bolt by turning adjust bolt. After installation, tighten lock bolt and fixing bolt to:
    • Tighten fixing bolt to 22 Nm (16 ft. lbs.) .
    • Tighten lock bolt to 24 Nm (17 ft. lbs.) .

A/C COMPRESSOR DRIVE BELT

  • Loosen lock bolt and adjust bolt by turning adjust bolt.
  • After installation tighten lock bolt to 50 Nm (37 ft. lbs.) .

POWER STEERING OIL PUMP DRIVE BELT

  • Loosen lock bolt and adjust bolt by turning adjust bolt.
  • After installation tighten lock bolt to 46 Nm (30 ft. lbs.) .

Courtesy of Isuzu America

Jerry and 7 other Car Specialists are ready to help you