How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask George H. Your Own Question
George H.
George H., ASE Certified Technician
Category: Car
Satisfied Customers: 18696
Experience:  ASE Master Tech 15+ yrs, AAS Automotive Technology, Factory trained Asian specialist
Type Your Car Question Here...
George H. is online now
A new question is answered every 9 seconds

How to reset tire pressure monitors on 2005 Cadillac Deville?

Customer Question

How to reset tire pressure monitors on 2005 Cadillac Deville?
Submitted: 8 years ago.
Category: Car
Expert:  George H. replied 8 years ago.

Hello I will answer your question,


A strong magnet, preferably a ring magnet is used in this procedure. You hod it over the valve stem in the order indicated in the procedure




  1. Turn the ignition to ON.
  2. Press the key fob lock and unlock buttons simultaneously for several seconds. The horn will chirp when the TPM programming mode is activated. IMPORTANT: If the TPM programming mode cannot be entered, check if the DIM is configured with the correct RPO codes.
  3. Starting with the left front tire.
    1. Install the J 41760 over the left front valve stem.
    2. The horn will sound, indicating the left front TPM sensor is programmed. IMPORTANT: If the horn does not sound after 15 seconds, remove then reinstall the TPM sensor programming tool.
    3. When the horn sounds, proceed to program the next TPM sensor in the following order:
    • Right front tire
    • Right rear tire
    • Left rear tire
    1. After the left rear sensor is programmed, the horn will sound twice to indicate programming is complete
    If this is the information you asked for please ACCEPT this answer
    Thank you