How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pragueress Your Own Question
Pragueress
Pragueress, ASE Certified Technician
Category: Car
Satisfied Customers: 744
Experience:  ASE certified technician; former ASE master Technician; Automotive instructor
13997640
Type Your Car Question Here...
Pragueress is online now
A new question is answered every 9 seconds

Prizm: geo..blower switch..is in the in dash control module..assembly

Resolved Question:

I have a 1990 Geo Prizm. The blower switch broke that is in the in dash control module. Can this be replaced or do I need to replace the whole in dash assembly?
Submitted: 8 years ago.
Category: Car
Expert:  Pragueress replied 8 years ago.

On a car this old there would be no harm in finding the wires that go to the blower switch and adapting a separate switch. Of course it will no longer look factory, but that is something you must weigh in your decision. I am sure that this dash module, if available, is costly.

 

If this has helped, please hit the accept key

Pragueress and 4 other Car Specialists are ready to help you
Customer: replied 8 years ago.
Nick,
On some web sites it shows a part for just the switch is it replaceble in the module?