How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask MIKEVIN_BEGGS Your Own Question
MIKEVIN_BEGGS, ASE Certified Technician
Category: Car
Satisfied Customers: 162
Experience:  General Motors, Ford, & Mitsubishi Certified technician.
Type Your Car Question Here...
MIKEVIN_BEGGS is online now
A new question is answered every 9 seconds

Daewoo..timing mark for the crank pulley could the keyway..crank shaft

Customer Question

2002 daewoo Leganza can`t find timing mark for the crank pulley could the keyway be the timing mark if not could the mark be on the front of the crank shaft, if not were?
Submitted: 9 years ago.
Category: Car
Expert:  MIKEVIN_BEGGS replied 9 years ago.
engine size please
Expert:  MIKEVIN_BEGGS replied 9 years ago.

Hello, my name is Kevin.


When you are satisfied with my answer, Please click ACCEPT. Positive feedback is always appreciated.


I show that vehicle as having a 2.2l d-tech dohc


the following pics show the crank & cam marks



the crank marks are in the gear & inner cover.



the cams will have the marks stamped into the gear.



When you're satisfied, click on accept. I don't get paid unless you press the accept key. A bonus and positive feedback are always appreciated, thanks & good luck.




Customer: replied 9 years ago.

Hi kevin... this is what Iv`e found under the hood to make sure we know what the right motor is (( D-TEC 16 V engine Family 1gwxvQ2 2002)

(( E.V.A.P. Family 1DWXROU95AOL))

(( Displacement 2198cc (134.1 CID ))

(regulation Applicable to 2001 model year passenger car.)

And kevin I took the crank pulley all the way off I don`t see a mark any where on it

when I look at the engine from the ground facing it. The front of the crank shaft has an area that seems to look a little shaded. or could that mark be talking about the keyway facing down at 6 oclock? Hope you can help.!

Customer: replied 9 years ago.
Hi kevin .......the pulley comes apart from the crank gear two pieces so that the crank gear can stay on the crank shaft. should I be looking for the mark on the pulley it self?or on the crank gear? and I think this may be one of those 0-motor NO MISTAKES.. And thank for taking the time
Customer: replied 9 years ago.
Hi kevin again Sorry Buit I forgot to teel about the crank pulley it has a round circle on the front out rim of the pulley it self . the belt broke while my wife was driving the car. this does not make since I`m hold the gear and the pulley in my hand and can`t see thing like the picture .
Expert:  MIKEVIN_BEGGS replied 9 years ago.
can you send me pictures of the crank gear???