How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask autotech155 Your Own Question
autotech155, ASE Certified Technician
Category: Car
Satisfied Customers: 429
Experience:  29 years ,drivability brakes ,a/c,trans repair,engine repair
Type Your Car Question Here...
autotech155 is online now
A new question is answered every 9 seconds

2004 chrysler crossfire: steering..I cannot turn the key to release it

Resolved Question:

what caused my 2004 chrysler crossfire to lockup;ignition,steering,transmission,I cannot turn the key to release it?
Submitted: 8 years ago.
Category: Car
Expert:  autotech155 replied 8 years ago.
Hello welcomwe to J What happens is the tumblers go bad in the lock assembly and you have to change the hole thing and then have it programed so the car will run. Eric
Customer: replied 8 years ago.
the lock cylinder has been changed twice previously for being hard to turn.
Expert:  autotech155 replied 8 years ago.
I know this lock cylinders have had there problems and i see a lot of them .maybe cyrsler may do some thing about it. eric
autotech155 and 6 other Car Specialists are ready to help you