How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask ase_master327 Your Own Question
ase_master327, Shop Owner
Category: Car
Satisfied Customers: 5288
Experience:  +15 years experience on imports and domestics. Bumper to bumper diagnosis & repair.
Type Your Car Question Here...
ase_master327 is online now
A new question is answered every 9 seconds

1988 Mighty Max: i install an ingnition coil

This answer was rated:

How do i install an ingnition coil in a 1988 Mighty Max Mitsubishi pick-up truck
Which engine is in it?
Customer: replied 9 years ago.
how to install an ignition coil in a 1988 Mitsubishi Mighty Max Pick up truck?


Maybe you didn't see my last info request, so...

Which engine is in your 1988 Isuzu MightyMax pickup truck?

If you aren't aware, there are 3 differnt ones.

Customer: replied 9 years ago.
Reply to ase_master327's Post: 2.6

Ok..Its not hard at all..

Here are the instructions:

  1. Disconnect the negative battery cable.
  2. Remove any components necessary to access the coil.
  3. Tag and disconnect all electrical leads.
  4. Remove any mounting bolts then the ignition coil.

To install:

  1. Install the coil assembly in position and tighten the mounting bolts.
  2. Connect all wires to the coil assembly.
  3. Install any components removed during disassembly.
  4. Connect the negative battery cable.

If you need anything else, just let me know!

ase_master327 and 5 other Car Specialists are ready to help you