How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tim West Your Own Question
Tim West
Tim West, ASE Certified Technician
Category: Car
Satisfied Customers: 4638
Experience:  ASE Certified Service Manager for Bridgstone/ Firestone
Type Your Car Question Here...
Tim West is online now
A new question is answered every 9 seconds

what is the correct key to do this

Customer Question

what is the correct key to do this
Submitted: 9 years ago.
Category: Car
Expert:  Tim West replied 9 years ago.
You must have a tech2 scantool to perform this function:

1. Use a scan tool to access the "Program key FOB's" section. Select "Start" on the scanner.

2. Press and hold the "Lock" and "Unlock" buttons on the key fob at the same time.

3. Hold the buttons down until the scanner indicates the programming has been completed. This usually takes about 5-10 seconds.

4. Do the same procedure for each key fob.
Customer: replied 9 years ago.
the key not yhe keyless entry
Expert:  Tim West replied 9 years ago.
Oh sorry be right back
Expert:  Tim West replied 9 years ago.
Hello again, this is directly from the manufacturer.
Provided in PDF format

Thank you