How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Randall (Cheeko) Your Own Question
Randall    (Cheeko)
Randall (Cheeko), Auto Mechanic
Category: Car
Satisfied Customers: 2395
Experience:  Auto Mechanic
Type Your Car Question Here...
Randall (Cheeko) is online now
A new question is answered every 9 seconds

How do I replace the alternator on my 1996 Ford Contour 4 cylinder?

This answer was rated:

How do I replace the alternator on my 1996 Ford Contour 4 cylinder?

Hi, below is the information, thanks



2.0L Engine


Disconnect battery ground cable (14301).

Remove engine air intake resonator, mass air flow sensor and air cleaner outlet tube assembly from throttle body (9E926) and air cleaner assembly.

Disconnect the wire harness attachments to the integral generator (GEN) (10300)/voltage regulator (VR) (10316).

Raise vehicle on hoist.

Remove the RH wheel and tire

Remove the RH splash shield.

Disengage the generator drive belt (8620) from the generator pulley (10344).

Lower vehicle.

Remove the generator mounting bolts and generator/voltage regulator



Randall (Cheeko) and 9 other Car Specialists are ready to help you
Customer: replied 9 years ago.
Looks good, but for some reason I can't print out the Full ViewImage. I would really like to print it. Instructions printed ok.
Hi,try right clicking the picture, then select print picture, thanks
Customer: replied 9 years ago.
Thanks. It's not your fault. My Dell computer somehow will let me print the instructions, but when I attempt to print the Image, it wants to use a printer that I no longer own. Can you e-mail the Full View Image to me?
Hi, I will see if the moderator on duty can send them to you, give me a few minutes, thanks
Hi, I don't see a moderator on line, try and save the info to your computer and then print the info, thanks