How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Hog Rider Your Own Question
Hog Rider
Hog Rider, Transmission Technician
Category: Car
Satisfied Customers: 307
Experience:  Transmission Rebulider of 19 year's . A.T.R.A. and A.T.S.G. Certifications of Completion of 9 year's
Type Your Car Question Here...
Hog Rider is online now
A new question is answered every 9 seconds

1998 VW Passat: 1-2 shift then 2-3 shift and then in to LIMP mode

Resolved Question:

We installed a used transmission in a 1998 VW Passat, It will not shift properly. we get 1-2 shift then 2-3 shift and then in to LIMP mode. Can anyone assist.
Submitted: 9 years ago.
Category: Car
Expert:  Hog Rider replied 9 years ago.


You MUST take it to the Dealer and have the Computer Reset, (Relearned)

It Cannot reconize the new transmissions, Values.

at this time Only a dealer with a V.A.G. (type of scanner) unit can do this.

Hog Rider and 6 other Car Specialists are ready to help you