Car

Ask a mechanic online and get answers to your car questions

Connect one-on-one with {0} who will answer your question

Related Car Questions
I am trying to obtain a vin report. My car has a fourteen
I am trying to obtain a vin report. My car has a fourteen digit vin number and all the vin check programs require 17 digits. The manufacture sticker on the car indicates it was made in Germany in 1971… read more
eric remington
eric remington
FORMER SHOP OWNER/TECHNICIAN/INSPECTOR
associates degree
1,609 satisfied customers
Mazda 6 I: On my 4 cyl. 2004 Mazda 6, am getting lots of warning
On my 4 cyl. 2004 Mazda 6, am getting lots of warning lights coming on and off and a U0100 code. Checked under the hood and have lots of oil on sparks plugs for Cyl. 2 and Cyl 3, but Cyl. 1 and Cyl 4 … read more
Pete
Pete
Automotive Diagnostic Specialist
General auto certifications
32,372 satisfied customers
I drive a 2004 Lincoln Navigator. When I start the engine it
I drive a 2004 Lincoln Navigator. When I start the engine it makes a LOUD ticking noise(my neighbors have heard it across the street)! As the vehicle warms up it slowly disappears. Unfortunately this … read more
Ironmike
Ironmike
ASE Master ,Ford Certified Master Tech
Vocational, Technical or Trade Scho
3,474 satisfied customers
2000 bmw 740il: the intake manifold gsks..sucking..smokes...any
i have a 2000 bmw 740il i just bought.they changed the intake manifold gsks before i got it.the car is sucking oil up in the intake and when you turn it off and let it sit then start the engine it smo… read more
trouble shooter
trouble shooter
Associate Degree
24 satisfied customers
Oldsmobile: other than a 350 engine or are there different headers
I bought what I thought to be an Oldsmobile 350 engine. Once I put it into my 86 Cutlass Supreme, the headers for a 350 did not match up. Do I have something other than a 350 engine or are there diffe… read more
daler0122
daler0122
Vocational, Technical or Trade Scho
28 satisfied customers
95 Jetta: cyl manual trans..141,704 on the odometer..mpg
I myself changed (as I almost always do) the oil at and filter on my '95 Jetta 4 cyl manual trans on March 27, 2007 at 141,704 on the odometer. The Jetta has been maintained fairly well (and I have do… read more
Dan
Dan
Automotive Fleet Management
High School or GED
416 satisfied customers
Town Car: oil leak at the oil filter casting that is bolted..changer
My wife's '93 Linc. Town Car has developed an oil leak at the oil filter casting that is bolted to the lower engine. Changer the filter and cleaned everything arounnd that location. The valve cover an… read more
HDGENE
HDGENE
7,395 satisfied customers
1997 Mercedes E320: pan..checked engine oil, transmission fluid
1997 Mercedes E320 - noticed oil (spillage, not just drops) on the ground on the front right side. It appears to have leaked from an open pan that is connected to part of the bottom of the engine. che… read more
RIP
RIP
Lead Technician
Vocational, Technical or Trade School
469 satisfied customers
Saturn: cyl..running rough..the spark plugs and air filter
This question concerns finding oil around one of the spark plugs, on a late 90's 4 cyl Saturn. My daughter called long distance with the question. The car was running rough, so she decided she would r… read more
GENE
GENE
service manager/lead technician
Vocational, Technical or Trade Scho
316 satisfied customers
1979 Volvo 244: I thought it was the clutch cable, which it was not.
I have a 1979 Volvo 244 which I love. I was starting it, when I felt a "pop". I thought it was the clutch cable, which it was not. It will start, but will not stay running, unless i keep the gas to th… read more
autodoc_2000
autodoc_2000
Automotive Technician/Asst Service Manag
Vocational, Technical or Trade Scho
2,556 satisfied customers
1972 ford f-150: trans.. It tries to start but wont stay running.
i have a 1972 ford f-150 truck with a 360 engine, 2 barrel, auto. trans.. It tries to start but won't stay running. I have set points,checked plugs, wires, dist. cap, rotor,coil, set timing, ckecked f… read more
Davo
Davo
Master Auto Tech/manager of auto shop
Vocational, Technical or Trade Scho
1,644 satisfied customers
according: New rollers rockers and camshaft...about 1500 miles on it
New rollers rockers and camshaft. Engine has about 1500 miles on it. Valves started clattering so we are attempting to readjust the valves according to the paperwork provided by the manufacturer. At w… read more
Danny
Danny
Service Manager / Foreman
Vocational tech. and College
418 satisfied customers
1978 ford f250: you provide a diagram of the rear brake drum..2wd
can you provide a diagram of the rear brake drum on a 1978 ford f250 2wd p-u Optional Information: Pre-1981 Ford f250 351m Already Tried: where do you want me to start… read more
Hammer Time
Hammer Time
L1 Master Technician
Vocational, Technical or Trade Scho
4,942 satisfied customers
68 Mustang GT: intake..hose..the carb, it makes the engine smoke..cap
I have a 68 Mustang GT with a 390 and just installed 428 cj heads and intake. When I hook the PCV valve hose the the front of the carb, it makes the engine smoke out the tailpipes? When the 390 heads … read more
Fordanswerman
Fordanswerman
Ford Senior Master Technician retired
Associate Degree
3,304 satisfied customers
66 mercury cyclone: put a new motor and tranny..ride..master..leaks
I have a 66 mercury cyclone that has been sitting with no motor for 22 years. I have put a new motor and tranny in it and am ready to ride except i cant get brakes ! Have installed 3 different master … read more
Hammer Time
Hammer Time
L1 Master Technician
Vocational, Technical or Trade Scho
4,942 satisfied customers
Olds: rebuilt..high pressure oil pump..pressure when warm and 20 psi
I recently rebuilt a 455 CI Olds using 3 oil restricter plugs and a high pressure oil pump. I only have 5 lbs of pressure when warm and 20 psi @ 2400 RPM. I know people who have built them using the p… read more
Marc
Marc
fleet supervisor
Vocational, Technical or Trade Scho
1,140 satisfied customers
1981 Ford mustang: thinking of adding a 4 barrell carb, is 480 cfm
I have a 289 2 valve 65 mustang, I am thinking of adding a 4 barrell carb, is 480 cfm too little, I have been told that over 650 cfm is too much what to do? Drake Optional Information: Pre-1981 Ford m… read more
Fordanswerman
Fordanswerman
Ford Senior Master Technician retired
Associate Degree
3,304 satisfied customers
1981 Camaro: V-6, 229 cubic in..been driven in 3 year..new starter
I have a 1981 Camaro, V-6, 229 cubic in. engine. It has not been driven in 3 year and I have changed the oil, battery, and put on a new starter. I have found oil leak on top of the motor above the cyc… read more
Chris
Chris
machinist
Associate Degree
16 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

The nearest Volvo dealer is 160 miles away. Best $15 bucks I have spent in a long time!

Paul MCorpus Christi, TX

< Previous | Next >

Meet the Experts:

Chris (aka-Moose)

Chris (aka-Moose)

Technician

1,528 satisfied customers

16 years of experience

Ted G.

Ted G.

ASE Certified Technician

1,819 satisfied customers

20 years auto repair experience, ASE Master Tech, Mechanical Failure consultant, Expert Witness

George H.

George H.

ASE Certified Technician

1,571 satisfied customers

ASE Master Tech 15+ yrs, AAS Automotive Technology, Factory trained Asian specialist

John

John

Master Automotive Technician

1,004 satisfied customers

ASE A1-A8 & L1 Master GM Tech 40 years experience

GM Tech (Cam)

GM Tech (Cam)

Auto Service Tech

682 satisfied customers

GM Grand Master Technician 2007. 14 years experience.

Amedee

Amedee

Former ASE Master Tech

2,629 satisfied customers

ASE certified tech advanced level specialist. Wisconsin certified emissions state inspector

Jerry

Jerry

Master Mechanic

2,181 satisfied customers

ASE master, 30+ years. All makes and models. Trouble shooter, shop forman, service manager

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x