How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask stereoaz Your Own Question
stereoaz
stereoaz, Car Electronics Technician
Category: Car Electronics
Satisfied Customers: 113
Experience:  35 years in car audio,my shop won iasca world title ,custom fabrication,expert installer.
45259138
Type Your Car Electronics Question Here...
stereoaz is online now
A new question is answered every 9 seconds

I have wiring ?S, brand new pyle pldnv71-7 for x mas,? s on

Customer Question

i have wiring ?S
JA: What's the make/model of your device? How old is it?
Customer: brand new pyle pldnv71-7 for x mas
JA: How long has this been going on? What troubleshooting have you tried?
Customer: ? s on the wiring colors
JA: Anything else you want the electronics expert to know before I connect you?
Customer: red = switched correct Yellow constant and black ground soo what is the switched one and two for and do i need to use these
Submitted: 9 months ago.
Category: Car Electronics
Expert:  umdterp13 replied 9 months ago.

Well, the constant wire will retain memory, the second turns the unit on with ignition, and ground is necessary for anything; I would advise making one of your own. Otherwise, you can check the pins to see whether its included with your harness provided there is one. Short answer, yes you need all three.