How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Car Audio Rusty Your Own Question
Car Audio Rusty
Car Audio Rusty, Car Electronics Technician
Category: Car Electronics
Satisfied Customers: 5909
Experience:  Powering, fusing, wiring, and general installation
Type Your Car Electronics Question Here...
Car Audio Rusty is online now
A new question is answered every 9 seconds

I got a used dvd player for my car and cant figure out the

Customer Question

I got a used dvd player for my car and cant figure out the wiring
JA: What's the make/model of your device? How old is it?
Customer: panasonic sg0460zc not sure of the age
JA: How long has this been going on? What troubleshooting have you tried?
Customer: just started trying to put it in now
JA: I'm sorry but I'm not sure we have an expert who covers what you are looking for. Maybe if you give me more details I will find you a connection to someone who can help you.
Customer: I need the wiring diagram for this device
JA: Anything else you want the electronics expert to know before I connect you?
Customer: no
Submitted: 10 months ago.
Category: Car Electronics
Expert:  Car Audio Rusty replied 10 months ago.

Hello, my name is***** to Justanswer! Give me just a few minutes to look up some specifics, I'm working on this now.

Expert:  Car Audio Rusty replied 10 months ago.

Red is ignition power.

Yellow is constant power.

Black is ground.

The remaining 8 are speaker wires. Turn the radio on once you get the power connected. Connect a set of speaker wires to determine which speaker the wire goes to. Set the fader to front, set the balance to left, and this will determine which speaker output is which. Do this for all of the speakers, and pay attention to polarity.

Customer: replied 10 months ago.
The unit I have is strictly a DVD player, not a radio. The colours that are there are yellow, black and orange then in another group is black with tracer purple with tracer and green with tracer. I am assuming that the last 3 are the stereo sound output to the radio. I am also guessing from what you replied that in the first group the black is ground, yellow is constant power and the orange would be ignition?
Expert:  Car Audio Rusty replied 10 months ago.

Yes, that is correct. The ones with the tracers are the - lead to the speaker. Start a DVD, and use your fader and balance to output to the individual speakers, and you'll have it connected properly in no time.