How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask stereoaz Your Own Question
stereoaz, Car Electronics Technician
Category: Car Electronics
Satisfied Customers: 113
Experience:  35 years in car audio,my shop won iasca world title ,custom fabrication,expert installer.
Type Your Car Electronics Question Here...
stereoaz is online now
A new question is answered every 9 seconds

Need car electronics tech

Customer Question

need car electronics tech
Submitted: 9 months ago.
Category: Car Electronics
Expert:  Louie replied 9 months ago.

Hi Peter and welcome to the site, I’m Louie. Sorry you had to wait awhile but I’ll do my best to help.

Initially, bear with us; re-confirm and post back with the complete model number of the car stereo.

Additionally, what are the concerns with this stereo ?

Customer: replied 9 months ago.
I require a wiring diagram for the factory stereo loom of my Nissan Navavra D40rx (extra cab - made in Taiwan ) .. It was built in 2008. I want to connect a brand new 'Kenwood DDX5015BT head unit' to the existing wiring loom of the Nissan ..
Expert:  Louie replied 9 months ago.

Unfortunately, no available diagram for this model/version at my end.

I can however, provide a method of determining what the radio wires of the Nissan are for and cross-match these to the Kenwood.

Would this approach be acceptable?

...or would you prefer an alternate approach/second opinion?

Customer: replied 9 months ago.
thank you Louie, i have worked it out...
Expert:  Louie replied 9 months ago.

Great Peter! Good to hear that the issue has been resolved, congratulations.