How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask ElectronicsPete Your Own Question
ElectronicsPete, Electronic Engineer
Category: Car Electronics
Satisfied Customers: 17268
Experience:  Over 16 years of experience installing and repairing electronics.
Type Your Car Electronics Question Here...
ElectronicsPete is online now
A new question is answered every 9 seconds

I have a viper 4105v remote car starter installed in a 2010

Customer Question

I have a viper 4105v remote car starter installed in a 2010 Honda CRV. It has worked fine for years. The car battery was just replaced, and now when i try to start the car with the remote, it cranks, but won't start. The car starts just fine with the key.
Any fixes for this problem?
Submitted: 1 year ago.
Category: Car Electronics
Expert:  ElectronicsPete replied 1 year ago.

Hi David,

You will need to reset the alarm:

put the key in the ignition, turn to acc, tap the valet switch 2 times.