How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Louie Your Own Question
Louie, Car Electronics Technician
Category: Car Electronics
Satisfied Customers: 12454
Experience:  25+ yrs. experience in the field and 5+ yrs. online, down to component level.
Type Your Car Electronics Question Here...
Louie is online now
A new question is answered every 9 seconds

I have a kenwood KDC-MP2035 suck between standby mode and

Customer Question

I have a kenwood KDC-MP2035 suck between standby mode and tuner
Submitted: 1 year ago.
Category: Car Electronics
Expert:  Louie replied 1 year ago.

Hi and welcome to JustAnswer,

Thank you for the question and your patience. Should you still need assistance for information purposes only...

Initially, bear with us; re-confirm and post back with the symptom(s) exhibited by the Kenwood KDC-MP2035 ...or more particularly, elaborate "...suck between standby mode and tuner ..."

Customer: replied 1 year ago.
Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from you: Live Phone Call. Let me know if you need more information, or send me the service offer(s) so we can proceed.
Customer: replied 1 year ago.
It is literally not allowing me to change from anything else in source besides tuner and standby. Won't allow auxiliary or CD.
Customer: replied 1 year ago.
Can I call you?
Expert:  Louie replied 1 year ago.

My current location would make phone calls not that 'easily doable'

Still, have you considered / tried a RESET please?

Customer: replied 1 year ago.
How do I do a reset?
Expert:  Louie replied 1 year ago.

Please click HERE.

Customer: replied 1 year ago.
Didn't work. Same problems
Expert:  Louie replied 1 year ago.

That a reset was not corrective is very significant as it would indicate a potential hardware issue.

And would you be able to check / remove the power connections at the rear of the Kenwood?