How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask ElectronicsPete Your Own Question
ElectronicsPete, Electronic Engineer
Category: Car Electronics
Satisfied Customers: 18104
Experience:  Over 16 years of experience installing and repairing electronics.
Type Your Car Electronics Question Here...
ElectronicsPete is online now
A new question is answered every 9 seconds

My JVC NT 700 froze up. The volume display is on the screen

Customer Question

My JVC NT 700 froze up. The volume display is on the screen at 0 and I can't get the faceplatento open. I tried a reset to defaults which didn't work. Any suggestions?
Submitted: 2 years ago.
Category: Car Electronics
Expert:  ElectronicsPete replied 2 years ago.

Hi there,

What reset method did you use?

Do any of the buttons below the screen seem stuck?

Customer: replied 2 years ago.
I reset to factory defaults through the menu. No, all of the buttons on the bottom seem fine
Expert:  ElectronicsPete replied 2 years ago.
Check that the touchscreen is clean - contamination on it can cause the system to not respond.
If that doesn't help, then it likely has a firmware glitch and will need to be retuned to a JVC service center.