How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Russell H. Your Own Question
Russell H.
Russell H., Service Tech
Category: Car Electronics
Satisfied Customers: 11222
Experience:  8+ years of professional experience
Type Your Car Electronics Question Here...
Russell H. is online now
A new question is answered every 9 seconds

My touch screen will not eject it's saying panel mecha err

Customer Question

My touch screen will not eject it's saying panel mecha error
Submitted: 2 years ago.
Category: Car Electronics
Expert:  Russell H. replied 2 years ago.
Hi, thank you for contacting My name is Russell. I will do my best to provide the right answer to your question.
Try pressing the RESET button, which is the button just below the lower right corner of the display (accessible from behind, perhaps, when the screen is opened or flipped enough).
That is what the manual recommends for this problem and this error message.
Also, esp. if that doesn't work, look for a small hole near the DVD disc slot or DVD tray... straighten a paper-clip, and push the eject button that is inside of that hole, with the end of the straightened paper-clip, and the DVD disc (or, the tray it is in) should slide out enough to grasp and pull out the rest of the way, and thus remove the disc.