How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08, ASE Certified Technician
Category: Cadillac
Satisfied Customers: 23003
Experience:  ASE Master and Advanced level certified. Factory trained with 15 years dealership experience
Type Your Cadillac Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

I am missing a few connectors and having an ABS problem,

Customer Question

I am missing a few connectors and having an ABS problem
JA: Have you checked the brake fluid? And have the brakes been squeaking?
Customer: brake fluid is ok, no squeaking brakes
JA: What is the make/model/year of your car?
Customer: It's an '02 Cadillac Escalade EXT 6.0 AWD
JA: Are you fixing your Escalade EXT yourself? What have you tried so far?
Customer: Yes. I had a problem with the ABS module. I replaced it but now I only have 2 connectors left
JA: Anything else you want the mechanic to know before I connect you?
Customer: Only the ABS module problem
Submitted: 11 months ago.
Category: Cadillac
Customer: replied 11 months ago.
I only have 2 connectors for the module. I think I am missing some connectors.How much connectors do I need and where are they coming from?
Expert:  sprinkles08 replied 11 months ago.

Hello and welcome to JustAnswer!

The ABS module should have two connectors and they come off the harness directly behind the module on the frame. There should be a two way connector and a 16 way connector.

Here is a good picture I located with a quick internet search.

Customer: replied 11 months ago.
Ok, I have these. The connectors on the other side of the module are not in use?
I am missing 2 round connectors of 2 sensors. One in the front of the ABS module, the other on the left side of the ABS module.. The snap-on is giving me the C0201.
I hope you have enough info.With kindly regards,John
Customer: replied 11 months ago.
On the left side there is a 2-pin and a 3-pin connector.
Customer: replied 11 months ago.
Behind the steel plate is the round connector of the right side. It has a black and red wire on the phote. In front of the ABS module there is a similar one.
Customer: replied 11 months ago.
Or do I have to connect these open slots to the round connectors?
Expert:  sprinkles08 replied 11 months ago.

Can you 8upload a picture of what you're questioning?