How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tool Hut Your Own Question
Tool Hut
Tool Hut, ASE Certified Technician
Category: Cadillac
Satisfied Customers: 550
Experience:  Owner of a mobile diagnostics company assisting auto technicians with difficult vehicles
Type Your Cadillac Question Here...
Tool Hut is online now
A new question is answered every 9 seconds

Just switched a 2006 Cadillac CTS engine for a 2007 Cadillac

Customer Question

Just switched a 2006 Cadillac CTS engine for a 2007 Cadillac CTS engine, car cranks but does not start?
Submitted: 10 months ago.
Category: Cadillac
Expert:  Tool Hut replied 10 months ago.

Hi, My Name is ***** ***** for posting your question to just answer. I am a independent contractor for just answer. ASE Certified Master Auto Technician with 20 years experience. I am confident we can resolve your problem together.Please remember I don't know your skill level. I can't see, smell, hear, or touch the vehicle. It may take a few back and forth replies to get to a satisfactory resolution.There will probably be some equipment needed for a proper diagnosis. If you are not comfortable with this or do not have any test equipment please let me know ASAP. I also give you all of the information you may need in good faith expecting a positive rating. I am not compensated for my time until you leave a positive rating. Your rating should be based on the service you received.

What test equipment do you have?

1. Test Light

2. Scan tool with data. please tell me brand

3. Fuel pressure gauge

4. Injector noid light set

5. Spark tester

Customer: replied 10 months ago.
Hi Hut, just searching for answers. I have no equipment yet?
Customer: replied 10 months ago.
Does the computer need to be reset after switching out engine?
Customer: replied 10 months ago.
U still there.
Expert:  Tool Hut replied 10 months ago.

It is likely that you need a theft learn. I have attached a manual relearn. Try this first

Expert:  Tool Hut replied 10 months ago.

Hello, I have not heard from you in a few days. Do you still need assistance? I also noticed you haven't left a rating. I have assisted in good faith and am only compensated when you leave a positive rating. Please let me know if there is anything else you need to leave a positive rating. Conversations can always continue after a rating is received.