How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gary Your Own Question
Gary, ASE Certified Technician
Category: Cadillac
Satisfied Customers: 999
Experience:  Senior Technician
Type Your Cadillac Question Here...
Gary is online now
A new question is answered every 9 seconds

Cadillac Xts: I'm hard wiring a brake control into my 2014

Customer Question

I'm hard wiring a brake control into my 2014 xts which wire do I hook into on the brake switch
Submitted: 1 year ago.
Category: Cadillac
Expert:  Gary replied 1 year ago.
Hi there,Your car has a brake pedal sensor, not a switch.Does your controller ask to be wired to a switch (2 wire) or can it be wired to a 3 or 6 wire pedal sensor?Gary
Customer: replied 1 year ago.
all the instruction say is to find the cold side of the sensor and tap into it so the brake controller works when pedal is pushed
Expert:  Gary replied 1 year ago.
Hi again,It does have a 6 pin Brake Pedal Position Sensor.Here is what it should have for pinout and wire color.I would say it is pin 3 or 4.Hope this helps.Gary
Expert:  Gary replied 1 year ago.
Hi Art,I hope my advice has been of assistance to you. Please rate my service at your nearest convenience. Kind regards Gary