sorry for the delay............
Greetings...... “Hi, I’m Don (aka MOLurch) and I look forward to helping you!”
This will depend on what is wrong..........
You will need to remove the Door Panel
click Attachment below
Check the Regulator for binding
Test the Window Motor for "Reversal Voltage & Ground"
Use of a VOM is needed to test
The way it works:
Switch held in Up position
One wire will have 12 Volts +
One wire will have Ground -
Switch held in Down position
The wire that had 12 Volts + is now Ground -
The wire that was Ground - is now 12 Volts +
If Voltage or Ground checks good at motor, replace motor.
If Voltage or Ground does not check good:
Check Switch Voltage & Ground.
Check for broken wires at Door / Kick Panel Boot
IF you need more information, please ask "prior" to Rating.
Please do the right thing and leave a rating, using the rating system, so I may be credited for this Q&A.
NOTE: Do NOT Rate on how much TIME you waited, because I am not on 24 / 7 and I answer as soon as I see the question.
The question will still remain open for follow up questions if needed.
If for any reason, you can't rate my answer OKAY, GOOD, or EXCELLENT today.
Please reply and let me know why, so I can help more/better.
Rating is very Important to our Service