How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John
John, ASE Certified Technician
Category: Cadillac
Satisfied Customers: 9176
Experience:  ASE CERTIFICATIONS A1-A8 & L1 / 40 YEARS AUTOMOTIVE EXPERIENCE
6408229
Type Your Cadillac Question Here...
John is online now
A new question is answered every 9 seconds

replacing license plate bulb 2002 dts

Resolved Question:

replacing license plate bulb 2002 dts
Submitted: 7 years ago.
Category: Cadillac
Expert:  John replied 7 years ago.

HelloCustomer

This should help you.

Rear License Plate Lamp Replacement

Removal Procedure

  1. Open the rear compartment lid.
    Object Number: 488471  Size: SH

  2. Push on the right side of the license lamp and release the locking tab.
  3. Allow the lamp to drop down from the opening.
    Object Number: 488475  Size: SH

  4. Disconnect the electrical connector.
    Object Number: 488477  Size: SH

  5. Remove the bulb from the socket.

Installation Procedure


    Object Number: 488477  Size: SH

  1. Install the license lamp bulb into the socket.
    Object Number: 488475  Size: SH

  2. Connect the electrical connector.
    Object Number: 459369  Size: SH

  3. Install the license lamp by inserting the left side of the lamp, then the right side.
  4. Press on the lamp until the tab locks.
  5. Close the rear compartment.
John and 5 other Cadillac Specialists are ready to help you