Buick

Buick Repair Questions? Ask a Mechanic for Answers ASAP

Ask an Expert,
Get an Answer ASAP!

2002 buick rendezvous cxl won't start all fuses are good and…

Customer Question
2002 buick rendezvous cxl...

2002 buick rendezvous cxl won't start all fuses are good and clean new battery and new starter still nothing . It ran fine til I came out and battery was dead tried to jump it and nothing ,so replaced battery ,and starter .I checked all fuses under hood and inside vehicle.

Mechanic's Assistant: Did you test the battery with a voltmeter? And have you ever changed one before?

Yes

Mechanic's Assistant: Are you fixing your Rendezvous yourself? What have you tried so far?

Replaced battery and starter ,I did myself

Mechanic's Assistant: Anything else you want the mechanic to know before I connect you?

No , I've racked my brain and can't figure it out

Submitted: 1 month ago.Category: Buick
Show More
Show Less
Ask Your Own Buick Question
Answered in 1 minute by:
3/15/2018
Buick Mechanic: Roy Belding, ASE Certified Technician replied 1 month ago
Roy Belding
Roy Belding, ASE Certified Technician
Category: Buick
Satisfied Customers: 7,288
Experience: Master ASE since 1980
Verified

Hello, my name is ***** ***** I will be glad to assist. Please allow me a moment to gather some information.

Ask Your Own Buick Question
Buick Mechanic: Roy Belding, ASE Certified Technician replied 1 month ago

does the engine crank over or does it do nothing when you go to start??

Roy

Ask Your Own Buick Question
Buick Mechanic: Roy Belding, ASE Certified Technician replied 1 month ago

are you there

Ask Your Own Buick Question
Customer reply replied 1 month ago
Won't crank
Customer reply replied 1 month ago
Won't crank at all .
Buick Mechanic: Roy Belding, ASE Certified Technician replied 1 month ago

ok,

is the security light or anti theft light on???

if it is, try the re learn. turn the key on to start, wait for 10 minutes and the light should go out. turn the key off and back on again, wait until the light goes out and repeat one more time. when the light goes out, it will have learned the password ***** the security system. try to start

Roy

Ask Your Own Buick Question
Buick Mechanic: Roy Belding, ASE Certified Technician replied 1 month ago

any update??

Ask Your Own Buick Question
Customer reply replied 1 month ago
Trying now on 3rd try now 9 min to go
Buick Mechanic: Roy Belding, ASE Certified Technician replied 1 month ago

ok

Ask Your Own Buick Question
Customer reply replied 1 month ago
Just did it and still nothing
Customer reply replied 1 month ago
Just did it and still nothing .
Customer reply replied 1 month ago
Battery Is full and on trickle charger while I attempted as to not drain the battery.
Customer reply replied 1 month ago
I went as far as replacing the bcm as well last week after it would not start after I replaced battery .Then replaced starter yesterday
Customer reply replied 1 month ago
How long do I wait in the off position 5 sec 10 sec I am now trying the ten seconds as I did the 5 sec 1st 3rounds
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago
david craig
david craig, ASE Certified Technician
Category: Buick
Satisfied Customers: 5,180
Experience: owner/mechanic at 3D Automotive
Verified

is the theft light staying on when the key is in the start position?

Ask Your Own Buick Question
Customer reply replied 1 month ago
on dash it is but not on radio ,radio isn't working either but everything else is working all lights blower .I don't get it.
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago

so you have a lock symbol or a key symbol?

Ask Your Own Buick Question
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago

or just the word security?

Ask Your Own Buick Question
Customer reply replied 1 month ago
Do I need to hold it in the start position the whole ten minutes then off then repeat cause I held it on position for a couple sec then released til timer was off then repeated
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago

no. you turn the key on. not start. the theft light should flash. is it?

Ask Your Own Buick Question
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago

let it flash for 10-11 minutes then it should go steady. then you turn the key off then back on. the theft light should flash for another 10-11 minutes then go steady again. then you turn the key off. then back on, the theft light should flash for another 10-11 minutes then go steady. then turn the key off and start the car

Ask Your Own Buick Question
Customer reply replied 1 month ago
I have a key symbol on radio but is not on at all. Light on top of dash is flashes
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago

ok, let the light flash until it goes steady and follow the procedure

Ask Your Own Buick Question
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago

aftermarket radio?

Ask Your Own Buick Question
Customer reply replied 1 month ago
No original radio was gonna hook up aftermarket but couldn't get it to stay on so put original back in and ran fine for a week or so then came out one morning wouldn't start tried jumping it nothing tore dash apart looking for a bad connection checked all fuses and replays and replaced battery starter and bcm nothing
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago

try the relearn procedure please

Ask Your Own Buick Question
Customer reply replied 1 month ago
I am on 2nd round of relearn 9 min to go
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago

working correctly so far?

Ask Your Own Buick Question
Customer reply replied 1 month ago
far
Customer reply replied 1 month ago
Nothing still won't go
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago

ok, then do you have a voltmeter?

Ask Your Own Buick Question
Customer reply replied 1 month ago
I have 12 volts to the # 58 relay
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago

standby

Ask Your Own Buick Question
Customer reply replied 1 month ago
I was able to jump it the 58 relay it started but shut off but it ran for about 5 sec
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago

the relay prongs should be numbered 30 87 86 85. correct?

Ask Your Own Buick Question
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago

30 has 12 volts?

Ask Your Own Buick Question
Customer reply replied 1 month ago
85 had 12 volts with key on
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago

ok did 30 have 12 volts with key off?

Ask Your Own Buick Question
Customer reply replied 1 month ago
No
Customer reply replied 1 month ago
No,I'll check again to make sure
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago

it better

Ask Your Own Buick Question
Customer reply replied 1 month ago
At 30 it goes to 8.4-7.7 fluctuation 86 is showing 12.4v
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago

ok, then 30 is a problem it needs to be 12 volts. its a direct feed from ign2 fuse

Ask Your Own Buick Question
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago

fuse 35

Ask Your Own Buick Question
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago

schematic

Ask Your Own Buick Question
Customer reply replied 1 month ago
replace 35 fuse
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago

somethings wrong between 35 and the relay but give it a shot. also check 87 on the relay for voltage

Ask Your Own Buick Question
Customer reply replied 1 month ago
Nothing at 87 and 85
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago

ok good. not supposed to be

Ask Your Own Buick Question
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago

pull 35 out and check for voltage on one side of it

Ask Your Own Buick Question
Customer reply replied 1 month ago
Left side is showing 12.4v other side nothing
Customer reply replied 1 month ago
Left side meaning closest to windsheild
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago

it shouldn't read anything on one side. so the problem is either the fuse or the wire between the fuse and slot 30 of the relay

Ask Your Own Buick Question
Customer reply replied 1 month ago
do I take fuse box apart or run a wire from dead side of 35 fuse to 30 on relay
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago

did you check the continuity of the fuse?

Ask Your Own Buick Question
Customer reply replied 1 month ago
Everything is intact and good connection
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago

but you are only getting 7-8 volts in slot 30 of the relay?

Ask Your Own Buick Question
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago

??

Ask Your Own Buick Question
Customer reply replied 1 month ago
Haven checked it's 20 ° out and 10:16 so I'll check in the morning
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago

ok. ill be on

Ask Your Own Buick Question
Customer reply replied 1 month ago
Thanks so far
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago

you bet

Ask Your Own Buick Question
Customer reply replied 1 month ago
No power to 30 at all this morning do I swap out the fuse box ?
Customer reply replied 1 month ago
When I ran a jumper it cranked over but wouldn't stay on with someone inside turning key
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago

standby

Ask Your Own Buick Question
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago

i would definitely remove the fuse block and see if you can find the wiring issue because it definitely is a wiring issue

Ask Your Own Buick Question
Customer reply replied 1 month ago
Popped it open and all contacts and wires are there
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago

and no corrosion and no breaks? pay attention to the wire going fuse fuse 35 to 86 of the relay

Ask Your Own Buick Question
Customer reply replied 1 month ago
I did perfect condition and clean I'll send a pic her in a min
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago

ok

Ask Your Own Buick Question
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago

do a continuity test of that wire. also check it for high resistance

Ask Your Own Buick Question
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago

well, the 12 volts to 30 is directly from the ign2 fuse. the ign 2 fise is powered by a bus that controls a lot of other things

Ask Your Own Buick Question
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago

dont know what to tell you. except you need to do a continuity test of the wire from the slot in 86 to the ign 2 fuse plug it(inside the fuse block

Ask Your Own Buick Question
Customer reply replied 1 month ago
Replaced fuse block under hood still won't start doing same thing under side of box is showing 12.4 v at connection points all connections good only thing I haven't replaced is the pcm.Everything else has been replaced
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago

and only showing what at the relay?

Ask Your Own Buick Question
Customer reply replied 1 month ago
12.4v
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago

ok, so now we have the correct voltage at the relay slot 30 correct?

Ask Your Own Buick Question
Customer reply replied 1 month ago
still nothing only click same as before no start I've replaced everything I can think of can it be the pcm.All fuses and relays clicking and show power at 12.4 v
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago

now when you turn the key to the start position check for 12 volts in slot 86

Ask Your Own Buick Question
Buick Mechanic: david craig, ASE Certified Technician replied 1 month ago

hows it going?

Ask Your Own Buick Question
Was this answer helpful?
Ask david craig Your Own Question
david craig
david craig
david craig, ASE Certified Technician
Category: Buick
Satisfied Customers: 5,180
5,180 Satisfied Customers
Experience: owner/mechanic at 3D Automotive

david craig is online now

A new question is answered every 9 seconds

How JustAnswer works:

  • Ask an ExpertExperts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional AnswerVia email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction GuaranteeRate the answer you receive.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.

DianeDallas, TX

< Previous | Next >

Meet the Experts:

Dave Nova

Dave Nova

Buick Technician

1,808 satisfied customers

ASE Master Certification. GM World Class Certification

Gary

Gary

Buick Technician

1,499 satisfied customers

15 years master GM tech and mater ASE tech

John

John

Buick Master Technician

731 satisfied customers

ASE A1-A8 w/L1 GM master technician.Factory certified with 40 years experience.

George H.

George H.

ASE Certified Technician

531 satisfied customers

ASE Master 15+years

Don - Mo Lurch

Don - Mo Lurch

Buick Mechanic

519 satisfied customers

GM, Chevrolet Cert., Heavy Line Mech, Race Shop Owner, Mobile Electronics.

Ron Z.

Ron Z.

- Buick Tech -

474 satisfied customers

18+yrs experience. State Inspector and Buick Diagnostics

Chris (aka- Moose)

Chris (aka- Moose)

Buick Technician

316 satisfied customers

16 years of experience

< Previous | Next >

Related Buick Questions
Code P0496 evaporative system high purge flow. The code i
This has happened a few times . Me and my mechanic want to know where the high purge flow do hicky is aka part # gm pn 12611801… read more
Eric
Eric
Retired
N/A
14,436 satisfied customers
I have a 1999 Buick Regal GS. There appears to be oil on the
I have a 1999 Buick Regal GS. There appears to be brown oil on the inside of the radiator cap and radiator. What could lead to this problem? Blown Head Gasket? Other? … read more
Dan
Dan
Automotive Technician
Vocational, Technical or Trade Scho
25 satisfied customers
I have 2008 buick enclave. Service stabilitrac light comes
I have 2008 buick enclave . Service stabilitrac light comes on then goes off sporatically . then oil pressure light comes on. We took car to mechanic, he repaced oil pressure switch, now he says oil p… read more
jim
jim
Vocational, Technical or Trade Scho
702 satisfied customers
My service engine light came on about 6 months ago. Didn't
Hi my service engine light came on about 6 months ago. Didn't stress about it for a while until now. My wife needs it to drive 40 mile s round trip on the freeway daily for work. So while accelerating… read more
Mechanic01
Mechanic01
2,401 satisfied customers
Hv replaced fan control module. 95 buick riv it ran a couple
Hv replaced fan control module. 95 buick riv it ran a couple weeks ago … read more
kwiggins29059
kwiggins29059
Associate Degree
219 satisfied customers
The compass has been erratic for about a week and now it
The compass has been erratic for about a week and now it indicates CAL. I have tried the recal. proceedure but is doesnt work.??? … read more
TIM MOHR
TIM MOHR
SHOP OWNER
Master's Degree
8,037 satisfied customers
My air will only come out of vent. Won't go to defrost or
My air will only come out of vent. Won't go to defrost or floor. Lots of clicking sound. My Buick is a***** … read more
Jared D
Jared D
Shop Supervisor
Bachelor\u0027s
3 satisfied customers
Will badly worn front tires with about 1/2 tread rear tires
will badly worn front tires with about 1/2 tread rear tires cause a service stabilatrac and traction control light … read more
Eric
Eric
Retired
N/A
14,436 satisfied customers
I have an 05 LaCrosse. Sometimes when I step on the brake
I have an 05 LaCrosse. Sometimes when I step on the brake the brake pedal does not want to push down. And makes Luke a humming noise., if I back out of my parking spot when I hit the brakes it's hard … read more
camerontech
camerontech
20 year experience diagnostic technician
class a
638 satisfied customers
Attempting to replace fan temp sensor cannot figure out to
Attempting to replace fan temp sensor cannot figure out to remove plastic collar to wrench out sensor … read more
kwiggins29059
kwiggins29059
Associate Degree
219 satisfied customers
WON'T START, ERROR MESSAGE AND SERVICE ENGINE. Code reader
Yes, everything, new battery, isolated the battery cables with jumper cable … read more
Pete
Pete
Independent Auto Technician
Vocational, Technical or Trade Scho
138 satisfied customers
I have a 2008 buick Lucerne 3.8, I have no power to the fuel
I have a 2008 buick Lucerne 3.8, I have no power to the fuel pump. Im have checked every fuse and relay … read more
Dan
Dan
Automotive Technician
Vocational, Technical or Trade Scho
25 satisfied customers
2014 buick enclave need to know where the air bag module is
2014 buick enclave need to know where the air bag module is and directions on how to get to it … read more
Chris (aka- Moose)
Chris (aka- Moose)
Buick Technician
Vocational, Technical or Trade School
316 satisfied customers
I have replaced my egr valve 2 times in 2 months and the
i have replaced my egr valve 2 times in 2 months and the service engine soon lights keeps coming back now i have code p0401 p0405 … read more
fordguy4u
fordguy4u
Automotive Tech
Vocational, Technical or Trade Scho
70 satisfied customers
The engine like comes on and it shuts down while driving.
The engine like comes on and it shuts down while driving. … read more
Dan
Dan
Automotive Technician
Vocational, Technical or Trade Scho
25 satisfied customers
My plugs and wires and coil pack were all changed in
My plugs and wires and coil pack were all changed in November 2017 there's a slight hestitation or sputter like it's gasping for air only when you first crank it after it's been parked for a few hours… read more
Chris (aka- Moose)
Chris (aka- Moose)
Buick Technician
Vocational, Technical or Trade School
316 satisfied customers
The power outlet under the steering wheel does not work.
the power outlet under the steering wheel does not work … read more
david craig
david craig
ASE Certified Technician
5,180 satisfied customers
Replaced the coolant elbows. But can't get the tensioner to
Replaced the coolant elbows. But can't get the tensioner to move, so I can adjust it. Suggestions? … read more
eauto
eauto
self employed
High School or GED
74 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x