How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dave Nova Your Own Question
Dave Nova
Dave Nova, Buick Technician
Category: Buick
Satisfied Customers: 1808
Experience:  ASE Master Certification. GM World Class Certification
Type Your Buick Question Here...
Dave Nova is online now
A new question is answered every 9 seconds

I need to know how to reset and install MC on a 2002 Buick

Customer Question

I need to know how to reset and install MC on a 2002 Buick Rendezvous. I specifically need to know how to release the module from the clip that is holding it in
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: My friend has had a mechanic to the point of replacing it and can not get a clip to release. She does not have a computer and I am doing this proxy...She seem fairly familiar with the set-up and how it should work.
JA: Anything else you think the mechanic should know?
Customer: I guess, it is my opinion that the reset should be done first and if it does not work, then do the replace. Would that be the best way to go?
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Buick Mechanic about your situation and then connect you two.
Submitted: 1 year ago.
Category: Buick
Expert:  Roy Belding replied 1 year ago.

good afternoon my name is ***** ***** I will assist

I have attached a picture for the master for you.

I have one of my own and have nothing bolted or attached to the master cylinder.

can you post a picture so I can see what is going on???


Related Buick Questions