How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask George H. Your Own Question
George H.
George H., ASE Certified Technician
Category: Buick
Satisfied Customers: 18692
Experience:  ASE Master 15+years
Type Your Buick Question Here...
George H. is online now
A new question is answered every 9 seconds

Buick Rendezvous CX: how to remove endgate (liftgate) trim

This answer was rated:

how to remove endgate (liftgate) trim panel to replace the lock (tailgate latch) on a 2002 buick rendezvous"

Hello I will help you with your question,

The panel pops off once you remove the inside handle, the special tool is a plastic pry bar but you can tape the tip of a screwdriver to help pop the panel off, free the bottom then lift off the top.

Click below for file

Look that over and let me know how I can help

Thank you

George H. and other Buick Specialists are ready to help you
Customer: replied 3 years ago.


thanks, XXXXX XXXXX helped, i needed to know where the fasteners are so the the trim panel does not break


I still need to order the latch. The answer met my needs for now


Thanks again Roger

Glad to help, please let me knpw what further questions you have.

Thank you