How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Travis Your Own Question
Travis, Buick Technician
Category: Buick
Satisfied Customers: 980
Experience:  7+ years of GM dealership experience, GM ASEP trained, Assoc. Degree in Auto. Tech.
Type Your Buick Question Here...
Travis is online now
A new question is answered every 9 seconds

2000 buick LeSabre: the license plate light bulbs

Customer Question

how do i change the license plate light bulbs on a 2000 buick LeSabre? there doesn't seem a way to get to the light bulbs!
Submitted: 8 years ago.
Category: Buick
Expert:  Travis replied 8 years ago.

Thanks for the question.


If I remember correctly, the entire rear lamp assembly will have to come out. There are a good amount of 10mm nuts on the inside of the trunk lid that need to be removed to allow that entire lamp assembly in the rear to come out, this should give you access to the lamps.

Customer: replied 8 years ago.
i will let u know what happens
Expert:  Travis replied 8 years ago.
Customer: replied 8 years ago.
<p>is the tail light assembly 1 piece or several pieces?</p><p> </p>
Expert:  Travis replied 8 years ago.
It is one large peice. You will pull off about 7-10,10mm bolts.