How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dominick Your Own Question
Dominick
Dominick, Marine Mechanic
Category: Boat
Satisfied Customers: 1009
Experience:  25 Years Experience as Mechanic, 20 Yrs Boat Yard Owner/Mechanic, Factory Certified
14379177
Type Your Boat Question Here...
Dominick is online now
A new question is answered every 9 seconds

I replaced a driveshaft and bearings in a 2002 225 torpedo

Customer Question

i replaced a driveshaft and bearings in a 2002 225 torpedo lower unit. Now when i tighten the retainer down on the top drive bearings, it tightens down on the bearings til the drive shaft won't turn. I removed shims and made no differance.
Submitted: 10 months ago.
Category: Boat
Expert:  Charles replied 10 months ago.

Hello, my name is***** will assist you.

Expert:  Charles replied 10 months ago.

How bad was the housing damaged when the old shaft broke?

Are you getting the upper bearing race in below the retainer nut?

Related Boat Questions