How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Charles Your Own Question
Charles, Marine Mechanic
Category: Boat
Satisfied Customers: 3977
Experience:  US Navy (Ret) Certified Mercury Marine Tech with over a decade of repair experience.
Type Your Boat Question Here...
Charles is online now
A new question is answered every 9 seconds

Randy Rudd here. Received new check valve for the trim tilt

Customer Question

Charles, Randy Rudd here. Received new check valve for the trim tilt unit, all 3 cylinders still bleed down. What is the next step and can you advise where I can get the right parts? Thanks much
Submitted: 1 year ago.
Category: Boat
Expert:  Charles replied 1 year ago.

Hello, my name is***** will assist you.

Expert:  Charles replied 1 year ago.

Randy, you are going to need part 13 in this diagram. It is the o-rings for the entire trim system. Make sure that the area you do this in is really clean, as you do not want anything to get into the system. It is best to remove the entire system from the boat when you do this.