How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Charles Your Own Question
Charles, Marine Mechanic
Category: Boat
Satisfied Customers: 3976
Experience:  US Navy (Ret) Certified Mercury Marine Tech with over a decade of repair experience.
Type Your Boat Question Here...
Charles is online now
A new question is answered every 9 seconds

Forgotten where the wires go trim button on my outboard 60

Customer Question

Forgotten where the wires go for the trim button on my outboard 60 hp
Submitted: 1 year ago.
Category: Boat
Expert:  Charles replied 1 year ago.

Hello, my name is***** will assist you.

Would you please post the serial number of the engine, so that I may pull up the correct one?

Is this on the control handle, or the engine?

Customer: replied 1 year ago.
on the engine and serial is od 187525 photo would be nice
Expert:  Charles replied 1 year ago.

On the engine harness you will see a blue, a green, and a red, that are coming from the trim relays/solenoids. Plug in one side of the wires from the cowling switch to them. On the boat harness end, there is a Blue and a Green that come out of the side of the large plug. Pug in the other connectors from the switch there.

Do you see these wires?

Expert:  Charles replied 1 year ago.

Did that work for you?