How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dominick Your Own Question
Dominick, Marine Mechanic
Category: Boat
Satisfied Customers: 1009
Experience:  25 Years Experience as Mechanic, 20 Yrs Boat Yard Owner/Mechanic, Factory Certified
Type Your Boat Question Here...
Dominick is online now
A new question is answered every 9 seconds

1978 V-195 Glastron w/280 Volvo Penta, can the transom/

Customer Question

1978 V-195 Glastron w/280 Volvo Penta, can the transom/bell housing shaft be pulled, once the bearing snap ring is removed. The only configurated image I can find is that of 1976 V-195, from what I have been able to remove, they appear to be the same. Bearing is seized to the shaft, shaft is drilled/tapped, can a hammer puller, pull the assembly from splined flywheel, by said image, appears it can. I do not see any other retaining devises.
Submitted: 2 years ago.
Category: Boat
Expert:  Jason replied 2 years ago.

Hello my name is ***** ***** am I speaking with?

I don't quite follow you, what is it you are trying to do?

Expert:  Jason replied 2 years ago.
Good morning. Just checking in. Did you still need help on the issue?

Related Boat Questions