How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dominick Your Own Question
Dominick, Marine Mechanic
Category: Boat
Satisfied Customers: 1009
Experience:  25 Years Experience as Mechanic, 20 Yrs Boat Yard Owner/Mechanic, Factory Certified
Type Your Boat Question Here...
Dominick is online now
A new question is answered every 9 seconds

I just replaced the limit switch and sender on a alpha one

Customer Question

I just replaced the limit switch and sender on a alpha one Gen 2. Prior owner wired the trailer to thr trim button, In other words if you didnt listen to drive you would burn up. My problem is I dont see how or were the wires go.
Submitted: 2 years ago.
Category: Boat
Expert:  Tan replied 2 years ago.
Hello. My name is***** will be assisting you.The wires are usually close to the trim pump. The trim limit wires are the blue and purple. Here is a diagram. The trim sender wire is brown. It will be close to the trim pump or at the rear of the engine in the harness.