Boat

Have Boat Questions? Ask a Boat Repair Expert.

Connect one-on-one with {0} who will answer your question

Related Boat Questions
I bought a boat with a 2000 Johnson plssm motor. It has two
I bought a boat with a 2000 Johnson plssm motor. It has two fuel type lines going into the motor. One is gas and the other comes from a OMC oil reservoir. What is the oil line for? Is it a four stroke… read more
Tan
Tan
MerCruiser Certified Technician
Certified Marine Technician
11,409 satisfied customers
Steering very stiff. Thought it was cable or tilt tube issue
Steering very stiff. Thought it was cable or tilt tube issue but those move freely after disconnecting from motor. Motor very hard to pivot by hand. Pumped some grease in and it comes out lower seal b… read more
Jason
Jason
Marine Mechanic
Vocational, Technical or Trade School
23,324 satisfied customers
I have 2 yahama 225 Four strokes 2002 3.3 liter. The steering
I have 2 yahama 225 Four strokes 2002 3.3 liter. The steering seems to be freezing up and we tried to grease it through the grease nipple near the lower unit but it cannot go through. Is there another… read more
Jason
Jason
Marine Mechanic
Vocational, Technical or Trade School
23,324 satisfied customers
I have a 2005 Campion with a Volvo Penta 4.3, the steering
I have a 2005 Campion with a Volvo Penta 4.3, the steering cable broke and was replaced. Now the power steering doesn't work? Whether the motor is running, or if it is off, the steering is stiff. Any … read more
Jason
Jason
Marine Mechanic
Vocational, Technical or Trade School
23,324 satisfied customers
I have a 29 foot boat with twin 150 hp Johnson outboards(about
I have a 29 foot boat with twin 150 hp Johnson outboards(about 2003). The steering is done with a wheel-activated hydraulic system. It has become very hard to steer, so I disconnected the steering cab… read more
Jeff G.
Jeff G.
Marine Mechanic
Vocational, Technical or Trade Scho
4,730 satisfied customers
I have a 1994 Mercury 150 Black Max that turns very hard.
I have a 1994 Mercury 150 Black Max that turns very hard. The boat was in Florida for most of its life. It is now in fresh water only. I have replaced steering cables and have narrowed the problem dow… read more
Tan
Tan
MerCruiser Certified Technician
Certified Marine Technician
11,409 satisfied customers
i have a 94 merc 2.5L 150 HP black max. steering was very
i have a 94 merc 2.5L 150 HP black max. steering was very stiff. i removed the steeering cable arm from motor bracket to isolate whether the problem was in the steering cable or in the main pivot of t… read more
Tan
Tan
MerCruiser Certified Technician
Certified Marine Technician
11,409 satisfied customers
I have a 1999 130 Johnson. The steering in frozen and I need
I have a 1999 130 Johnson. The steering in frozen and I need to know the proceedure to unlocking it. If the motor when unhooked from the steering linkage moves freely then I am assuming the problem is… read more
Tan
Tan
MerCruiser Certified Technician
Certified Marine Technician
11,409 satisfied customers
The steering on my 2005 50 hp mercury is stiff.replaced the
The steering on my 2005 50 hp mercury is stiff.replaced the gear box and cable , still stiff. have greased all fitting on engine . still stiff when disconnected from cable. Any suggestions?… read more
Jeff G.
Jeff G.
Marine Mechanic
Vocational, Technical or Trade Scho
4,730 satisfied customers
Grease points for volvo sterndrive! I have a Fairline Viven
Grease points for volvo sterndrive! I have a Fairline Viven with volvo AQ120 engine and (I thought) 270 sterndrive. But Operators Manual shows slight differences on sterndrive to the one I have. I bel… read more
James
James
Certified Marine Mechanic
Vocational, Technical or Trade Scho
4,094 satisfied customers
All of a sudden, the steering on our Malibu has become much
All of a sudden, the steering on our Malibu has become much tighter. By that I mean that you have to "muscle" the steering more than before. Also, sometimes the steering will "catch" and you have to p… read more
Tan
Tan
MerCruiser Certified Technician
Certified Marine Technician
11,409 satisfied customers
my force 150 pivot pin lower bushing is very tight . I need
my force 150 pivot pin lower bushing is very tight . I need 2 hands to steer. Ques. how should I free up the lower pivot bushing ?… read more
Jeff G.
Jeff G.
Marine Mechanic
Vocational, Technical or Trade Scho
4,730 satisfied customers
i have a 1995 70b tohatsu outboard, with all steering linkage
i have a 1995 70b tohatsu outboard, with all steering linkage dissconnected the motor is hard to steer side to side(by hand) it seems the top steering bushing isn't getting any grease coming out of it… read more
Jeff G.
Jeff G.
Marine Mechanic
Vocational, Technical or Trade Scho
4,730 satisfied customers
my outboard is difficult to turn to the right or left. I have
my outboard is difficult to turn to the right or left. I have mechanical steering which works fine, but the vertical column on the actual outboard is rusted or lacks grease. What can I do to make it m… read more
Jeff G.
Jeff G.
Marine Mechanic
Vocational, Technical or Trade Scho
4,730 satisfied customers
I have a twin engine Mako with 2000 115Hp Evinrude one engine
I have a twin engine Mako with 2000 115Hp Evinrude one engine turn very easy the other is stiff how can I lube the the piviot shaft. their does not appear to be a greese fitting… read more
Whitecap36
Whitecap36
Service Manager/Technician
Vocational, Technical or Trade Scho
1,557 satisfied customers
i have a 2007 vip baystealth with a 90hp honda and the steering
i have a 2007 vip baystealth with a 90hp honda and the steering has gotten real stiff. any suggestions on what to do? it has rack and pinion steering.i have taken the cable loose and the motor turns g… read more
John White
John White
Marine Mechanic
Vocational, Technical or Trade Scho
306 satisfied customers
Sir .. I have a 2000 bayliner capri , steering is very stiff
Sir .. I have a 2000 bayliner capri , steering is very stiff in the water ,out of water it seems to turn a lot easer,are there grease fittings i am not seeing ? this boat has only been in water about … read more
Dominick
Dominick
Marine Mechanic
Vocational, Technical or Trade Scho
1,009 satisfied customers
My 50 hp 1985 Merc was working ok last fall when I put it away
My 50 hp 1985 Merc was working ok last fall when I put it away for the winter. Now I can not turn the motor with the steering wheel . Seems locked.. It's not just tough to turn it DOES NOT TURN. IS th… read more
JamesHorvath305
JamesHorvath305
Owner, President
Associate Degree
30 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.

DianeDallas, TX

< Previous | Next >

Meet the Experts:

Ted G.

Ted G.

Rigger, Diagnostician

2,678 satisfied customers

40 years boating, Safe boating instruct., Offshore Race promoter, Failure Analysis, Expert Witness

Dominick

Dominick

Marine Mechanic

1,009 satisfied customers

25 Years Experience as Mechanic, 20 Yrs Boat Yard Owner/Mechanic, Factory Certified

John White

John White

Marine Mechanic

306 satisfied customers

11 years experience working on outboards, inboards, sterndrives & pwcs

Jason

Jason

Marine Mechanic

23,324 satisfied customers

Degree in Marine Technology. Gas and diesel marine mechanic.

Tan

Tan

MerCruiser Certified Technician

11,409 satisfied customers

40 yrs. experience with complete engine repairs both inboard/outboard and MerCruiser Certified Technician.

Jeff G.

Jeff G.

Marine Mechanic

4,730 satisfied customers

42 years experience, Certified Master Technician, All Major Outboards, Sterndrives, Hi-Performance

Captain Dave

Captain Dave

Marine Mechanic

2,672 satisfied customers

USCG Licensed Captain, 20+ Years Boating, Fishing, Maintenance and Repair Experience

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x