How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Noel Schembri Your Own Question
Noel Schembri
Noel Schembri, Marine Technician
Category: Boat
Satisfied Customers: 1951
Experience:  Advanced technical diploma
Type Your Boat Question Here...
Noel Schembri is online now
A new question is answered every 9 seconds

I have a 2010 tracker grizzly 1754 sc w/mercury 25hp 4S. The

This answer was rated:

I have a 2010 tracker grizzly 1754 sc w/mercury 25hp 4S.

The problem is the key no longer will start the motor and the power trim doesn't work. I can pull start motor and throttle control works perfect. I've looked for a cut cable but didn't see anything.

Any ideas?

Hello my name is XXXXX XXXXX I will help you with your problem. On the engine where there are the electrics on the starboard side you have a fuse, most probably it is blown. Replace it and it should be ok.
if you have further questions let me know.

Customer: replied 5 years ago.

The fuse is on the motor or by the throttle console?
The fuse is on the motor. You have to remove the top cowl.

Noel Schembri and other Boat Specialists are ready to help you
Sorry i meant the port side not starboard. Here is a link of where it is located:

Fuse is no 36
Customer: replied 5 years ago.
Thank you.... That makes sense because the trim button on the motor doesn't work either.
Yes in fact it gives power to your remote controller

Related Boat Questions