Boat

Have Boat Questions? Ask a Boat Repair Expert.

Ask an Expert,
Get an Answer ASAP!

I have a 1991 29 warlock with a factory ignitio system it…

Customer Question
I have a 1991 29'...
I have a 1991 29' warlock with a factory ignitio system it has a 5200RPM rev limiter how do I chave the rev limiter of remove it
Submitted: 8 years ago.Category: Boat
Show More
Show Less
Ask Your Own Boat Question
Answered in 9 minutes by:
6/11/2010
Marine Mechanic: Jeremy R., MarineTechnician replied 8 years ago
Jeremy R.
Jeremy R., MarineTechnician
Category: Boat
Satisfied Customers: 9,020
Experience: Multiple factory certifications 20+ years of experience.
Verified
Welcome, you will need to send the ECU out to get it reprogramed
Ask Your Own Boat Question
Customer reply replied 8 years ago
how can reprogram the ECU
Marine Mechanic: Jeremy R., MarineTechnician replied 8 years ago
if this is carbed, then no ECU, you could go with the MSD box and distributor, most marine motors run from 4400-5200, unless your building a race block with a race boat
Ask Your Own Boat Question
Customer reply replied 8 years ago
If no ECU how is the rev limiter controlled
Marine Mechanic: Jeremy R., MarineTechnician replied 8 years ago
no rev limiter unless electronic ignition
Ask Your Own Boat Question
Was this answer helpful?

How JustAnswer works

step-image
Describe your issueThe assistant will guide you
step-image
Chat 1:1 with a marine mechanicLicensed Experts are available 24/7
step-image
100% satisfaction guaranteeGet all the answers you need
Ask Jeremy R. Your Own Question
Jeremy R.
Jeremy R.
Jeremy R., MarineTechnician
Category: Boat
Satisfied Customers: 9,020
9,020 Satisfied Customers
Experience: Multiple factory certifications 20+ years of experience.

Jeremy R. is online now

A new question is answered every 9 seconds

How JustAnswer works:

  • Ask an ExpertExperts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional AnswerVia email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction GuaranteeRate the answer you receive.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.

DianeDallas, TX

< Previous | Next >

Meet the Experts:

Dominick

Dominick

Marine Mechanic

1,009 satisfied customers

25 Years Experience as Mechanic, 20 Yrs Boat Yard Owner/Mechanic, Factory Certified

Ted G.

Ted G.

Rigger, Diagnostician

704 satisfied customers

40 years boating, Safe boating instruct., Offshore Race promoter, Failure Analysis, Expert Witness

John White

John White

Marine Mechanic

306 satisfied customers

11 years experience working on outboards, inboards, sterndrives & pwcs

Jason

Jason

Marine Mechanic

17,310 satisfied customers

Degree in Marine Technology. Gas and diesel marine mechanic.

Tan

Tan

MerCruiser Certified Technician

11,264 satisfied customers

40 yrs. experience with complete engine repairs both inboard/outboard and MerCruiser Certified Technician.

Jeff G.

Jeff G.

Marine Mechanic

4,729 satisfied customers

42 years experience, Certified Master Technician, All Major Outboards, Sterndrives, Hi-Performance

Captain Dave

Captain Dave

Marine Mechanic

2,672 satisfied customers

USCG Licensed Captain, 20+ Years Boating, Fishing, Maintenance and Repair Experience

< Previous | Next >

Related Boat Questions
Have twin 275 Verado's. One engine started running rough after
Have twin 275 Verado's. One engine started running rough after fueling. Idled fine but cut out on take off then after plane cut out at around 3800 rpm. Checked onboard filter's and they were clean(had… read more
Clamp-onTech
Clamp-onTech
405 satisfied customers
I have a 1991 25hp merc, wi not go into reverse....I was
I have a 1991 25hp merc, wi not go into reverse....I was trying to dock it in a hard cross wind and went to rev and it just reved up wo rev. It had been not going al the way in pryer to that wo going … read more
Clamp-onTech
Clamp-onTech
405 satisfied customers
My motor will not go over 4K RPM it goes into guardian mode?
My motor will not go over 4K RPM it goes into guardian mode? It does this whether in neutral or drive. Is there an over rev limiter while in neutral and is there a switch that tells the motor that it … read more
Clamp-onTech
Clamp-onTech
405 satisfied customers
we are looking for information on the 500/502 EFI.. there is
we are looking for information on the 500/502 EFI.. there is a factory rev limiter built into the ECU set to approx. 5400 rpm? we are installing 2 new engines and am looking to see if the rev limiter … read more
Jason
Jason
Marine Mechanic
Vocational, Technical or Trade Scho
17,310 satisfied customers
I have a 1992 Suzuki DT40 on a pretty light stripped down 14ft
I have a 1992 Suzuki DT40 on a pretty light stripped down 14ft falcon boat. Maybe 200lb hull, maybe. Trouble is I'm hitting the rev limiter. I realize the first response would be that I'm under proppe… read more
Jason
Jason
Marine Mechanic
Vocational, Technical or Trade Scho
17,310 satisfied customers
I have 1995 30 hp 2 stroke that starts breaking up above half
I have 1995 30 hp 2 stroke that starts breaking up above half throttle. I have changed fuel lines , plugs, squeeze ball and hose, new gas ect. the funny thing is that it runs full throttle with only m… read more
Jason
Jason
Marine Mechanic
Vocational, Technical or Trade Scho
17,310 satisfied customers
I have a 1995 7.4 gl Volvo Penta. This has the bid ignition
I have a 1995 7.4 gl Volvo Penta. This has the bid ignition along with what appears to be a rev limiter. There is two gray wires, one from the harness that is hooked up to the b+ side of the coil whic… read more
Jason
Jason
Marine Mechanic
Vocational, Technical or Trade Scho
17,310 satisfied customers
I have a 1983 Evinrude 7.5 model E8RCTA that has a chipped
I have a 1983 Evinrude 7.5 model E8RCTA that has a chipped tooth on the pinion gear (part #17 in this diagram: http://www.boats.net/images/diagrams/brp/IMAGES/393578/20.png ). How do I remove the pini… read more
Clamp-onTech
Clamp-onTech
405 satisfied customers
I have a 1991 Volvo Penta 740 A Duo Prop. I believe it has
I have a 1991 Volvo Penta 740 A Duo Prop. I believe it has series 7 props. It has GMC 454 330 HP and the boat is a 1991 22' Cobalt. I am the original owner. Very familar with the boat. I can no longer… read more
James
James
Certified Marine Mechanic
Vocational, Technical or Trade Scho
4,094 satisfied customers
one more question what rpm will cause a over rev code. if everything
one more question what rpm will cause a over rev code. if everything is working fine. I guess a better way to ask is what is the rev limit… read more
Jason
Jason
Marine Mechanic
Vocational, Technical or Trade Scho
17,310 satisfied customers
I was running my Suzuki DF115 4 stroke saturday,running full
I was running my Suzuki DF115 4 stroke saturday,running full throttle a few miles then all of a sudden it kinda went into the rev limiter mode then fell off plane and died.started right back up no pro… read more
Jason
Jason
Marine Mechanic
Vocational, Technical or Trade Scho
17,310 satisfied customers
Mercury 200 saltwater carby 200: hi, i have a 2004 carby saltwater
hi, i have a 2004 carby saltwater 200 merc.it hits the rev limiter ar about 5700 .can i adjust or remove it please ..cheers tony… read more
Jeff G.
Jeff G.
Marine Mechanic
Vocational, Technical or Trade Scho
4,729 satisfied customers
Have an 2001 Johnson 50 old tech 2 cyl which has less than
Have an 2001 Johnson 50 old tech 2 cyl which has less than 300 hrs and has been taken care of. The motor starts right up but more often than not will not go over 2200 rpms. It seems as if a rev limite… read more
Tan
Tan
MerCruiser Certified Technician
Certified Marine Technician
11,264 satisfied customers
Hey guys, I have a 1994 OMC turbo-jet 115 and have put a hot
Hey guys, I have a 1994 OMC turbo-jet 115 and have put a hot set of heads, land and sea reeds, different exhuast, intake grate, nozzle extension, electric fuel pump etc. I also tossed the oil injectio… read more
Jeff G.
Jeff G.
Marine Mechanic
Vocational, Technical or Trade Scho
4,729 satisfied customers
I have a 1998 sea doo gtx limited jet ski. I put in fresh gas
I have a 1998 sea doo gtx limited jet ski. I put in fresh gas and oil and put it in the lake Runs but will not get up and go. Turn it wide open and it will rev up and jump and then just about stop. It… read more
Jeremy R.
Jeremy R.
MarineTechnician
9,020 satisfied customers
i have a 1976 55hp johnson 2clinder it has got good fuel
i have a 1976 55hp johnson 2clinder it has got good fuel and spark i have replaced the power pack' and plugs it had a timeing triger replaced a week ago was going fine then i slowed the boat down to c… read more
davesoutboard
davesoutboard
owner
Associate Degree
1,570 satisfied customers
brand new pontoon with 15 prokicker. had to dock in high winds.
brand new pontoon with 15 prokicker. had to dock in high winds. wind blew boat into shoreline rocks and nicked up the 4 blade aluminum prop. Only used once sine then. rpm was not steady.....wavered ar… read more
davesoutboard
davesoutboard
owner
Associate Degree
1,570 satisfied customers
Have you ever heard of a rev-arrester on the 5.7 volvo penta
Have you ever heard of a rev-arrester on the 5.7 volvo penta? If you have what is its function?… read more
Dominick
Dominick
Marine Mechanic
Vocational, Technical or Trade Scho
1,009 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x