732 satisfied customers
Specialities include: Marine mechanic, Diesel Engine Repairs, Boat Body Repairs, Boat and Watercraft Repairs
You should have 85 to 90 psi on all 6 cyls. The important thing is that they are all within about 5 psi of each other.
This is a Loop charged engine. The ports in the pistons and cyls create a looped intake charge and exhaust scavenge thus the term "Looper"
They can be identfied by their flat topped pistons.
yes, that is the correct compression for your model when it was brand new and it should still be the same if it is in good condition.
Nope, it won't be over 100psi unless someone has milled the deck or cyl heads.
732 satisfied customers
Ellen
Licensed mechanics