Boat

Have Boat Questions? Ask a Boat Repair Expert.

Connect one-on-one with {0} who will answer your question

Related Boat Questions
I have a 2001 Mercury 9.9 4 stroke that I just replaced the
I have a 2001 Mercury 9.9 4 stroke that I just replaced the swivel bracket with a used one. when I put everything back together the motor turns fine when steering left but is stiff when steering right… read more
Jason
Jason
Marine Mechanic
Vocational, Technical or Trade School
22,043 satisfied customers
Stiff steering, Steering is very stiff in both directions.
Steering is very stiff in both directions. It has a power steering unit. … read more
Tan
Tan
MerCruiser Certified Technician
Certified Marine Technician
11,409 satisfied customers
The steering cable on my boat is frozen/seized. the rod
the steering cable on my boat is frozen/seized. the rod attached to the end of the cable that goes through the aluminum tube on the motor mount will not move… read more
Tan
Tan
MerCruiser Certified Technician
Certified Marine Technician
11,409 satisfied customers
I have a 1986 Sea Ray Seville SBRII with a 140 hp Mercuriser
I have a 1986 Sea Ray Seville SBRII with a 140 hp Mercuriser I/O motor. The steering wheel won't move unless I use quite a bit of force, and then it will only turn the motor about 6 inches off center … read more
Joe
Joe
Owner Kingsland Auto & Marine Services
Vocational, Technical or Trade Scho
1,396 satisfied customers
Hi i have a haines hunters 6m fibreglass boat 150 hp mercury
Hi i have a haines hunters 6m fibreglass boat 150 hp mercury motor with old rack and pinion steering that i was thinking of changing the steering cable over. is it worth my while to change the steerin… read more
Noel Schembri
Noel Schembri
Marine mechanic
Diploma
2,687 satisfied customers
I have a 89 Bass Buggy pontoon floor replacement project in
I have a 89 Bass Buggy pontoon floor replacement project in process. The console must be removed to replace the floor under it. All other wiring has been disconnected and labeled to reassemble. Two ca… read more
Tan
Tan
MerCruiser Certified Technician
Certified Marine Technician
11,409 satisfied customers
Hi, I have an evinrude 60HP (E60ELCTB) and the steering
Hi, I have an evinrude 60HP (E60ELCTB) and the steering has seized. I have disconnected the steering rod from the engine and the engine turns fine, so problem is with the cable. I disconnected the fit… read more
Tan
Tan
MerCruiser Certified Technician
Certified Marine Technician
11,409 satisfied customers
I am trying to change a manual tilt unit on my 1994 Evinrude
I am trying to change a manual tilt unit on my 1994 Evinrude 50hp outboard. (model#e50beletb7) Does anyone have instructions on how todo this. I am having a problem getting the cable loose… read more
Jeff G.
Jeff G.
Marine Mechanic
Vocational, Technical or Trade Scho
4,730 satisfied customers
I have a Bayliner 23 with rack and pinion sheathed cable stering.
I have a Bayliner 23' with rack and pinion sheathed cable stering. Turning the wheel is more difficult this season (takes 2 hands). How do I lube the system to prevent further problems? Thanks, Walt… read more
Tan
Tan
MerCruiser Certified Technician
Certified Marine Technician
11,409 satisfied customers
How do you remove the upper pin that goes thru the tilt assist
How do you remove the upper pin that goes thru the tilt assist cylinder on a 1992 50hp Evinrude? The only thing visible is a stainless disc that appears to have a female thread.… read more
Jeff G.
Jeff G.
Marine Mechanic
Vocational, Technical or Trade Scho
4,730 satisfied customers
How do you get the steering rod out of the housing on a 2003
How do you get the steering rod out of the housing on a 2003 50hp I have removed the cable nut cut the worm drive off but the rod will not slid out… read more
briggs archer
briggs archer
master marine mechanic
Associate Degree
402 satisfied customers
honda 90 2001 on a poon toon had to cut cable to get out BUT
honda 90 2001 on a poon toon had to cut cable to get out BUT spiral and inner cable still in steering attachment hit other side with wood block and hammer and got motor to move to left when standing b… read more
Jeremy R.
Jeremy R.
5,362 satisfied customers
Is it posible to improve the steering on a 26 starcraft with
Is it posible to improve the steering on a 26' starcraft with OMC outdrive 1983 . 800 series… read more
Steve Sr.
Steve Sr.
No Title
High School or GED
79 satisfied customers
How do I remove the steering cable (engine end) for a rack
How do I remove the steering cable (engine end) for a "rack" steering system. The end of the cable is threaded onto a piece that moves (turns) with the cable. How do I keep this piece from moving so I… read more
davesoutboard
davesoutboard
owner
Associate Degree
1,570 satisfied customers
The rack and pinion steering in my Bayliner boat is extremely
The rack and pinion steering in my Bayliner boat is extremely stiff. Does this mean the steering cable needs to be replaced?… read more
Larry B.
Larry B.
Marine Service Tech
High School or GED
574 satisfied customers
I have a 93 bayliner 19 bowrider. It has 3.0 l 115hp Mercruiser
I have a 93' bayliner 19' bowrider. It has 3.0 l 115hp Mercruiser I/O. Since last season the rack and pinion steering has become very stiff. Also I have trouble keeping the boat going straigh at idlei… read more
Dominick
Dominick
Marine Mechanic
Vocational, Technical or Trade Scho
1,009 satisfied customers
I have a 1989 Stratos 201 PRO boat with a 200 HP Evinrude V6
I have a 1989 Stratos 201 PRO boat with a 200 HP Evinrude V6 Motor. My steering is very difficult. I guess my cables are bad. It has rack & pinion steering. Can I replace 1 or both cables without repl… read more
ROCKET
ROCKET
MASTER CERTIFIED TECH
Vocational, Technical or Trade Scho
426 satisfied customers
I am changing my steering cable on a 18 ft. glaspar volvo ...
I am changing my steering cable on a 18 ft. glaspar volvo penta 3.0 L sterndrive. I have gotten down everything apart but when i try to slide the rod at the end of the cable out of the housing in the … read more
Scott
Scott
Marine technician
Vocational, Technical or Trade Scho
543 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.

DianeDallas, TX

< Previous | Next >

Meet the Experts:

Ted G.

Ted G.

Rigger, Diagnostician

2,678 satisfied customers

40 years boating, Safe boating instruct., Offshore Race promoter, Failure Analysis, Expert Witness

Dominick

Dominick

Marine Mechanic

1,009 satisfied customers

25 Years Experience as Mechanic, 20 Yrs Boat Yard Owner/Mechanic, Factory Certified

John White

John White

Marine Mechanic

306 satisfied customers

11 years experience working on outboards, inboards, sterndrives & pwcs

Jason

Jason

Marine Mechanic

22,043 satisfied customers

Degree in Marine Technology. Gas and diesel marine mechanic.

Tan

Tan

MerCruiser Certified Technician

11,409 satisfied customers

40 yrs. experience with complete engine repairs both inboard/outboard and MerCruiser Certified Technician.

Jeff G.

Jeff G.

Marine Mechanic

4,730 satisfied customers

42 years experience, Certified Master Technician, All Major Outboards, Sterndrives, Hi-Performance

Captain Dave

Captain Dave

Marine Mechanic

2,672 satisfied customers

USCG Licensed Captain, 20+ Years Boating, Fishing, Maintenance and Repair Experience

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x