Boat

Have Boat Questions? Ask a Boat Repair Expert.

Connect one-on-one with {0} who will answer your question

Related Boat Questions
I have a question about break-in procedure. I ran the motor
I ran the motor at varying speeds below 4500 rpm but forgot to accelerate to full throttle for 1 min. every 10min. as Mercury recommends. Murc. 90 hpfourstroke. I ran it for 2 hr. so far. … read more
Charles
Charles
Certified Mercury Tech
5,523 satisfied customers
225 merc runs up to 3000 rpm drops to idle. 1998 mercury 225
1998 mercury 225 efi under load goes up to 3000 rpm shuts down and go to idle, fuel pressure is 35 psi … read more
Charles
Charles
Certified Mercury Tech
5,523 satisfied customers
I have a 2006 2320 with a transom bracket mount F225 Yamaha
I have a 2006 Parker 2320 with a transom bracket mount F225 Yamaha xtr outboard. It's slow to get up on a plane, (heavy boat), and sometimes the engine will not exceed 4500 rpm? Then, with the throttl… read more
Jason
Jason
Marine Mechanic
Vocational, Technical or Trade School
18,955 satisfied customers
I have a Stanly all welded aluminum boat with a yahama 70 F
Hello Jason I have a Stanly all welded aluminum boat with a yahama 70 F outboard I have two props one is a 13/12 x 15 k this pulls tubers great but only gets to 4500 WOT the other is a 13/12 x 17 k it… read more
Jason
Jason
Marine Mechanic
Vocational, Technical or Trade School
18,955 satisfied customers
225 four stroke Yamaha outboard, 2005 327 hours on it, 24ft
225 four stroke Yamaha outboard, 2005 327 hours on it, 24ft Skagit Orca XLC No not turn up over 4500 rpm's?… read more
Charles
Charles
Certified Mercury Tech
5,523 satisfied customers
2005 yamaha 225 4 strokes . 290 hrs . launched boat just idling
2005 yamaha 225 4 strokes . 290 hrs . launched boat just idling out of channel starboard motor died . we go anchor starts back up when give it gas then dies again . changed both fuel filter water /fue… read more
Jason
Jason
Marine Mechanic
Vocational, Technical or Trade School
18,955 satisfied customers
I have a 2006 searay with 6.2 mpi The port motor only comes
I have a 2006 searay with 6.2 mpi The port motor only comes up to 4500 rpm Throttle feels dead compared to starboard which revs to 5000 rpm and is Much stronger. Just had a valve job and head gasket r… read more
Noel Schembri
Noel Schembri
Marine mechanic
Diploma
1,804 satisfied customers
I have twin 250 verados and one only gets 4500 rpms and the
I have twin 250 verado's and one only get's 4500 rpms and the other will do 5700 rpms' they are 7 years old with less than 400 hours. I have a 5 year extended warranty and had many issues with turbos … read more
Charles
Charles
Certified Mercury Tech
5,523 satisfied customers
I have a 06 mercury 40hp EFI 3cyl outboard motor. It runs great
I have a 06 mercury 40hp EFI 3cyl outboard motor. It runs great out of water with a hose connected to it. When I put the boat in the water it takes off just fine then drops RPM's. It's suppose to run … read more
Charles
Charles
Certified Mercury Tech
5,523 satisfied customers
I have a 250 efi mercury 1999 and having overheating issue
I have a 250 efi mercury 1999 and having overheating issue at 3000rpm after 3 to 5 minutes of operation?? This has been going on for about a year we have tried everything , popped valves pulled the cy… read more
Charles
Charles
Certified Mercury Tech
5,523 satisfied customers
I have a ticking noise coming from my Volvo pinta 5.7 gsi
I have a ticking noise coming from my Volvo pinta 5.7 gsi motor only under load starts at about 2100 rpms !!!… read more
Tan
Tan
MerCruiser Certified Technician
Certified Marine Technician
11,406 satisfied customers
I have a 1994 suzuki 225 dt two stroke, it starts up fine but
I have a 1994 suzuki 225 dt two stroke, it starts up fine but when I try to drive it will only reach 2000 rpms... seems to be an engine problem as i have run it on an external tank with th same result… read more
Noel Schembri
Noel Schembri
Marine mechanic
Diploma
1,804 satisfied customers
I have a 50HP EfI 4 stroke ELpt big foot engine on my pontoon
I have a 50HP EfI 4 stroke ELpt big foot engine on my pontoon that is a 2002 model year. It starts great and idles well but after a few minutes of running at speeds of 3000 rpm or more, a warning tone… read more
Jeremy R.
Jeremy R.
5,362 satisfied customers
2003 Mercury 150 2 stroke with carbs (no EFI) Saltwater series.
2003 Mercury 150 2 stroke with carbs (no EFI) Saltwater series. 100hrs on it. I have an alarm beeping after it warms up. Is it a oil injection problem? Resavior above carbs is full, cap with float und… read more
Jason
Jason
Marine Mechanic
Vocational, Technical or Trade School
18,955 satisfied customers
Hi, What would cause a cylinder to foul intermittedly on
Hi, What would cause a cylinder to foul intermittedly on a 2006 Mercury 150 EFI 2 stroke. The motor idles perfectly and runs above 3800rpm no problems. When I drop the rpm from 3800 to 3400 number 2 (… read more
Jeff G.
Jeff G.
Marine Mechanic
Vocational, Technical or Trade Scho
4,730 satisfied customers
I have a 225 four stroke yamaha when i put a load on the engine
I have a 225 four stroke yamaha when i put a load on the engine and come down from plane the engine will not go below 2500-3000 rpms now when I start the motor it revs right to that range .checked the… read more
Jeremy R.
Jeremy R.
5,362 satisfied customers
Twin- 225 Yam OX66 1999 Model, pushing 30 ft scarab sport 19
Twin- 225 Yam OX66 1999 Model, pushing 30 ft scarab sport 19 pitch props... When running WOT the max rpm is about 4500 both engines...when you push and hold the tilt/trim button, it acts like nitrix o… read more
TOM
TOM
Vocational, Technical or Trade Scho
196 satisfied customers
1989 yamaha 225 excel outboard i recently was having trbl at
1989 yamaha 225 excel outboard i recently was having trbl at 4900 full throttle with the engine surging to 4500-4400 i have since checked all carbs lower carb had blocked full to bowl set all floats n… read more
Pappy's Sales and Service
Pappy's Sales and Service
Vocational, Technical or Trade Scho
586 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.

DianeDallas, TX

< Previous | Next >

Meet the Experts:

Ted G.

Ted G.

Rigger, Diagnostician

1,074 satisfied customers

40 years boating, Safe boating instruct., Offshore Race promoter, Failure Analysis, Expert Witness

Dominick

Dominick

Marine Mechanic

1,009 satisfied customers

25 Years Experience as Mechanic, 20 Yrs Boat Yard Owner/Mechanic, Factory Certified

John White

John White

Marine Mechanic

306 satisfied customers

11 years experience working on outboards, inboards, sterndrives & pwcs

Jason

Jason

Marine Mechanic

18,955 satisfied customers

Degree in Marine Technology. Gas and diesel marine mechanic.

Tan

Tan

MerCruiser Certified Technician

11,406 satisfied customers

40 yrs. experience with complete engine repairs both inboard/outboard and MerCruiser Certified Technician.

Jeff G.

Jeff G.

Marine Mechanic

4,730 satisfied customers

42 years experience, Certified Master Technician, All Major Outboards, Sterndrives, Hi-Performance

Captain Dave

Captain Dave

Marine Mechanic

2,672 satisfied customers

USCG Licensed Captain, 20+ Years Boating, Fishing, Maintenance and Repair Experience

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x