BMW

BMW questions? Ask a BMW repair Expert for answers.

Connect one-on-one with {0} who will answer your question

Related BMW Questions
P1174, 97z3 1.9 engine rough idle no pass smog 15 mph" no"
P1174, 97z3 1.9 engine rough idle no pass smog 15 mph" no" to high … read more
Daniel
Daniel
BMW Diagnostician
Automotive Diagnostician
984 satisfied customers
=] I have a 2000 bmw z3 with an m52tu engine. I currently
I currently have p1519 and p1520 engine codes. 167k miles manual … read more
VWDoc
VWDoc
Owner
Bachelor's Degree
6,135 satisfied customers
Code p1188 and p1189. 2000 e39. 528i. Replace maf and the
At start up when cold rough idle and cuts off but when I disconnect vanos on exhaust side it idles fine… read more
JOHN aka Eauto
JOHN aka Eauto
self employed
High School or GED
20,636 satisfied customers
Smoke tested my 2000bmw323i.only leaks i found were at the
smoke tested my 2000bmw323i.only leaks i found were at the valve cover right hand side. other than valve stem clearance bad seals possibly what else does this tell me and should i be concerned. 138000… read more
Marty
Marty
ASE Certified Technician
Associate Degree
643 satisfied customers
Changed out the brake master cylinder and bled the system.
changed out the brake master cylinder and bled the system. Brakes work fine now but the car started idleing very rough. So much so that 1st thing in the morning the car will shut off if not forced to … read more
Ron
Ron
Automotive Tech
Vocational, Technical or Trade Scho
40,283 satisfied customers
I have a 2009 335i (E90, N54) with 95 kmiles, AT, runs good
I have a 2009 335i (E90, N54) with 95 kmiles, AT, runs good but has a lean mixture condition code P0171 for Bank 1. Bank 1 (cyl 1-3) spark plugs (20 kmiles on them) look white-ish with odd gray spot o… read more
Matt
Matt
Engineer
Bachelor's Degree
506 satisfied customers
323i: , my 2000 323i has multiple cylinder misfires with
hi, my 2000 323i has multiple cylinder misfires with fuel cutoff and pre-cat O2 sensor failure codes. changed the o2 sensors but the o2 and multiple cylinder misfire codes still come up… read more
Steve
Steve
Master's Degree
25,492 satisfied customers
328ci: I have a 2000 E46 328ci (high milage ~225k) SES light.
I have a 2000 E46 328ci (high milage ~225k) SES light. codes using a generic reader initially were some lean P0171. I found typick cracked boot replaced. after a 100 miles or so Im throwing P0170 P118… read more
Thebmwbum
Thebmwbum
BMW Foreman
Vocational, Technical or Trade School
714 satisfied customers
2000 BMW 323ci: below error codes..Camshaft position sensor..circuit
Hello, I have a 2000 BMW 323ci and getting the below error codes: P1188 - Fuel Control (bank 1 sensor 1) P1189 - Fuel Control (bank 2 sensor 1) P0170 - Large Vacuum leak on engine Probable cause: 1. F… read more
Steve
Steve
Master's Degree
25,492 satisfied customers
2006 bmw x5: I have codes 235 bank 1 fuel trim contol..obd2
2006 bmw x5 I have codes 235 bank 1 fuel trim contol then also getting obd2 p1092 witch is saying fuel trim control bank 2 before cat witch code do I go by or what could be the problem thanks… read more
bimmaster
bimmaster
BMW Technician
Vocational, Technical or Trade Scho
1,883 satisfied customers
I have 2000 328i e46. I had cma sensor code replaced and cleared
I have 2000 328i e46. I had cma sensor code replaced and cleared codes. Could not pass emission test because of sleeping computer.I now have a p1189 code which is fuel problem, while driving car and s… read more
GEORGEBMW1
GEORGEBMW1
Auto Repair Shop Owner
Virgina Automotive Technical Instit
61 satisfied customers
528i: installed new..new fuel pump.Came..tow truck..fuel pressure
97BMW 528i. 3 weeks ago installed new fuel pump.Came back on tow truck.has 50 lbs fuel pressure.stumbles at idle. moving throttle under changes nothing. Disconnecting tps does nothing. Disconnecting p… read more
Anthony
Anthony
Master Automobile Technician
Vocational, Technical or Trade Scho
11,778 satisfied customers
BMW 318i: SE..MIL light on, Code P0170 Fuel trim bank 1
BMW 318i SE (2000 E46) MIL light on, Code P0170 Fuel trim bank 1. What requires attention etc??… read more
Roger
Roger
BMW Master Tech
Bmw STEP Training
3,091 satisfied customers
2000 BMW 740IL: I have the service engine light illuminated right now
I have a 2000 BMW 740IL with a 4.4l engine. I have the service engine light illuminated right now. The code reader came up with PO171 system too lean bank 1 and PO174 system too lean bank 2. I changed… read more
bimmaster
bimmaster
BMW Technician
Vocational, Technical or Trade Scho
1,883 satisfied customers
ENGINE LIGHT IS ON (WHATS NEW) I..CAM POSITION SENSOR..LIGHT CAME
I HAVE A 2000 5281 E39. THE ENGINE LIGHT IS ON (WHATS NEW) I HAD A CODE P1397 AND CHANGED THE CAM POSITION SENSOR AND "O" RING. BUT WITHING A WEEK THE LIGHT CAME ON AGAIN THIS TIME WITH CODE P1189 FUE… read more
Sam
Sam
BMW Master technician
Vocational, Technical or Trade Scho
1,043 satisfied customers
2000 BMW 323CI: position sensor..electrical..P1622 MAP cooling control
We have a 2000 BMW 323CI with 5 trouble codes: P1188 Fuel Control (Bank 1 Sensor 1), P1189 Fuel Control (Bank 2 Sensor 1), P1624 Pedal position sensor potentiometer supply channel 1 electrical, P1622 … read more
Cliff Burton
Cliff Burton
Master Technician / Foreman
Vocational, Technical or Trade Scho
172 satisfied customers
1999 323i: that has misfires on cylinders 1, 4,5,6
I have a 1999 323i (E46 body) that has misfires on cylinders 1, 4,5,6. I can reset the computer and drive it and then I will get different cylinders misfireing.… read more
Tim West
Tim West
Service Manager
Computer/ Automotive certifications
16 satisfied customers
pending code since i have chancged my air mass flow,oxygen sensor.it
I still have the pending code since i have chancged my air mass flow,oxygen sensor.it appears on the diagnostic computer as fuel air metering pending code(p1174)… read more
tnick
tnick
Automotive Technician
High School or GED
68 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Roger

Roger

BMW Master Tech

3,091 satisfied customers

18 yrs. experience as BMW Master Technician, Shop Foreman, ASE Master Certified

Marty

Marty

ASE Certified Technician

643 satisfied customers

ASE & Bosch Certified Master Tech. Over 30 years experience.

bimmaster

bimmaster

BMW Technician

1,883 satisfied customers

3 years dealer experience, master bmw tech

Sam

Sam

BMW Master technician

1,043 satisfied customers

BMW S.T.E.P. graduate, 10 years BMW dealership experience

Thebmwbum

Thebmwbum

BMW Foreman

714 satisfied customers

31 years BMW Experience

mike

mike

BMW Technician

694 satisfied customers

bmw master tech ase certified

Matt

Matt

Engineer

506 satisfied customers

Mechanical Engineer with 20 years experience in the auto industry, 8 yrs in formula 1 engine testing

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x